[January 17, 2017] |
|
Keysight Technologies Addresses 400G/PAM-4 Test Challenges at DesignCon 2017
Keysight Technologies, Inc. (NYSE:KEYS) today announced it will exhibit
its latest high-speed
digital solutions at DesignCon
2017, Booth 725, Santa Clara Convention Center, Feb. 1-2. Keysight's
technical experts and application engineers will demonstrate the most
advanced design and test solutions, developed for solving today's most
difficult high-speed digital measurement challenges. Keysight is proud
to be the host sponsor of DesignCon 2017.
In addition, Keysight will deliver eight complimentary, 40-minute
education workshop sessions led by Keysight industry experts. Topics
include USB Type-C™, signal and power integrity, 400G/PAM-4, PCIe4,
DDR4/LPDDR4, data analytics and IBIS-AMI simulation basics. Keysight
will make copies of the presentations and videos available following the
show to everyone who registers at the Keysight booth.
Keysight will demonstrate the following solutions at its booth:
1. USB
3.1/Type-C Tx/Rx/PD Test - Keysight will demonstrate its latest USB
Type-C transmitter and receiver test solutions, developed to properly
characterize and validate USB designs, as well as its cable and
connector test solution using its network analyzer with the TDR option.
2. PCIe®
Rx/Tx Test - Keysight will demonstrate the tools and techniques that
engineers can use to test PCI (News - Alert) Express 4.0 devices, specifically the
physical layer Gen4 requirements for transmitters and receivers.
3. Signal Integrity and Power Integrity - Keysight will show a
cohesive solution for signal and power integrity analysis. This includes
new design
and test
techniques to gain rapid insight, as well as new channel
simulation techniques.
Keysight's Physical
Layer Test System (PLTS) 2017 is a new software release and features
PAM-4 eye diagrams, channel operating margin (COM) and a SCPI command
interface for manufacturing automation applications.
Keysight will also demonstrate its new Digital
Interconnect Test System Reference Solution, used to enable signal
integrity characterization of multiport interconnect products.
4. 400G/PAM-4 - Keysight will show new measurement techniques,
including its new M8040A
highly integrated 64 Gbaud high-performance BERT, developed for
testing electrical and optical PAM-4 transmitters and receivers.
5. Data Analytics - Keysight will demonstrate its new data
analytics software capability that addresses the need for data
management and efficient and intuitive measurement analysis.
6. DDR4/DDR5 Memory Test and Validation - Keysight will
demonstrate how to easily acquire cross-correlated measurements of
traffic on DDR/LPDDR buses and the power integrity of systems, as well
as innovative new probing and debug techniques that provide rapid
insights for engineers into their high-speed memory systems.
7. Flexible Multi-Level Signal Generation - Using its M8195A
and M8196A AWGs, Keysight will demonstrate how to generate
multi-level signals, such as HDMI, MIPI, and PAM-16 802.3bz.
Keysight service and support specialists will be available at the booth
to answer questions about its accredited calibrations, technology
refresh services, training and consulting offerings.
Additional information about the show is available at Keysight
DesignCon 2017.
About Keysight in Digital Test
Keysight's solutions for digital applications are driven and supported
by Keysight experts who are involved in various international standards
committees. Keysight experts are active in the Joint
Electronic Devices Engineering Council (JEDEC), PCI
Special Interest Group (PCI-SIG®), Video
Electronics Standards Association (VESA), Serial
ATA International Organization (SATA-IO), USB
Implementers Forum (USB-IF), Mobile
Industry Processor Interface (MIPI®) Alliance, Ethernet
standards (IEEE 802.3), Optical
Internetworking Forum (OIF) and many others. Keysight is committed
to involvement in standards groups and related workshops, plugfests and
seminars to ensure the right test solutions are created to meet
customers' evolving needs.
About Keysight Technologies
Keysight Technologies (NYSE: KEYS) helps customers bring breakthrough
electronic products and systems to market faster and at a lower cost.
Keysight's solutions go where the electronic signal goes, from design
simulation, to prototype validation, to manufacturing test, to
optimization in the network. Customers span the worldwide communications
ecosystem, internet infrastructure, aerospace & defense, automotive,
semiconductor and general electronics end markets. Keysight generated
revenues of $2.9B in fiscal year 2016. More information is available at www.keysight.com.
USB Type-C™ and USB-C™ are trademarks of the USB Implementers Forum.
PCI-SIG®, PCIe® and the PCI Express®
are U.S. registered trademarks and/or service marks of PCI-SIG.
Additional information about Keysight Technologies is available in the
newsroom at www.keysight.com/go/news.
View source version on businesswire.com: http://www.businesswire.com/news/home/20170117005199/en/
[ Back To Mobile World Congress's Homepage ]
|