TMCnet News

Global and China Automotive LiDAR Industry Report 2023: From Outside to Inside the Cabin, LiDAR Makes a New Leap
[February 15, 2024]

Global and China Automotive LiDAR Industry Report 2023: From Outside to Inside the Cabin, LiDAR Makes a New Leap


DUBLIN, Feb. 15, 2024 /PRNewswire/ -- The "Automotive LiDAR Industry Report, 2023" report has been added to ResearchAndMarkets.com's offering.

Research_and_Markets_Logo

From outside to inside the cabin, LiDAR makes a new leap.

In April 2023, Hesai released ET25, an automotive-grade ultrathin long-range LiDAR which is specially designed to be placed behind the front windshield. With only 25mm in thickness (AT128 is 48mm), this product features 120x25 FOV, ranging without the windshield behind the windshield), the minimum resolution of 0.05x0.05, and power consumption of just 12W.

It is worth noting that ET25 uses a 905nm solution, almost on a par with 1550nm solutions. This is mainly credited to Hesai's new-generation transceiver chip with sensitivity several times higher than the previous generation. Li Yifan, CEO of Hesai, says that it is very difficult to miniaturize products without affecting core performance, and this requires extremely excellent semiconductor technology, which is high core strength.'

In September 2023, Hesai and FAW built designation cooperation. The next-generation flagship all-electric models under Hongqi brand will be the first to use Hesai's ET25 LiDAR. The result of the cooperation is expected to be mass-produced and delivered in the first half of 2025.

In addition to Hesai, Innovusion's Robin-E also meets the requirements of "entry into cabins'. Innovusion has formed strategic partnerships with Fuyao Glass and AGC's subsidiary Wideye, initially realizing the integration of LiDAR and front windshield. Bao Junwei, Innovusion's CEO, believes that the introduction of LiDAR into cabins is a trend, but it will not completely replace cabin front radar.

Why is Hesai so far ahead and what is its core strength? Its CEO Li Yifan believes that independent development of chips is Hesai's competitive edge.

In late 2017, Hesai established a chip department to develop laser driver ICs, analog front-end ICs, digital ICs, and SoCs. It now has completed V1.0, V1.5, V2.0, and V3.0 LiDAR chip architectures, and is developing V4.0, which will be available to the next-generation LiDAR products in 2026.

RoboSense: It has built three major LiDAR platforms - M Platform (semi-solid state), E Platform (solid state) and R Platform (mechanical), and is designing and developing next-generation LiDAR platform - F Platform. The M Platform is oriented to ADAS and is based on 2D MEMS galvanometers, with products including M1, M1P and M2.

In March 2023, RoboSense said that it had received OEM mass production designation expected orders for its front LiDAR M1 for 52 vehicle models from 21 automotive automakers and Tier 1 suppliers.

Currently RoboSense has improved its delivery capacity by way of establishing a joint venture (Luxsense, a joint venture co-funded with Luxshare) and self-building production line (Honghualing and Shiyan factories in Shenzhen). Wherein, the investment in the Phase I of the Luxsense-centric Intelligent Manufacturing Cluster of RoboSense exceeded RMB1 billion, involving construction of nearly 20 automatic production lines with annual capacity of 1 million units and efficiency of 'producing one LiDAR every 12 seconds'.




In addition to local companies, foreign companies like Luminar and Valeo have also quickened their deployment pace in Chinese market. For example, in April 2023 Luminar announced a partnership with TPK to build and operate an additional high-volume LiDAR factory in China. At the first stage, the new factory will be capable of producing up to 600,000 Luminar LiDAR sensors annually to meet increasing market demand. Of the now more than 20 production vehicle models Luminar is designed into, the majority including Rising R7, Volvo EX90 Excellence and Polestar 3 are also slated for the China market.

Solid-state gap filler LiDAR comes as a new track.


When automakers still consider whether to install LiDAR and how many to install, solid-state gap filler LiDAR has 'come out of the blue.'

Later Hesai Technology, RoboSense, Zvision, and Innovusion introduced their gap filler LiDAR as well, all of which are scheduled to be marketed in 2023.

Large FOV is the key to gap filler LiDAR, especially vertical FOV.

RoboSense's gap filler LiDAR RS-LiDAR-E1 offers a horizontal FOV of 120, and a vertical FOV of 90, with the perception range covering both ground blind spots and side view. 2 E1 LiDARs plus 1 120 FOV main LiDAR provides 360 view coverage. RoboSense believes that a vertical FOV smaller than 90 easily leads to a risk of insufficient perception range.

With regard to the progress in installation in vehicles, Hesai Technology's gap filler LiDAR FT120 is the first to be implemented. In August 2023, Polestones 01 was launched on market. This car packs 3 Hesai LiDARs including 1 AT128 front + 2 FT120 side LiDARs, becoming China's first model carrying solid-state gap filler LiDARs.

Although gap filler LiDAR costs much less than front LiDAR, it is still more expensive than gap filler sensors such as camera/radar. Moreover, a vehicle generally needs multiple gap filler LiDARs, which is bound to push up the cost. Therefore the wide adoption of gap filler LiDARs in vehicles will take some time.

Key Topics Covered:

1 Overview of LiDAR
1.1 Introduction
1.2 Composition
1.3 Core Technologies
1.3.1 LiDAR Ranging Technology
1.3.2 LiDAR Transmitter Module Technology
1.3.3 LiDAR Scanning Module Technology
1.3.4 LiDAR Receiving Module Technology
1.3.5 LiDAR Control Module Technology
1.3.6 Comparison of LiDAR Technologies
1.4 Major Technical Parameters
1.5 LiDAR Industry Chain
1.6 Vehicle LiDAR Application Scenarios and Requirements

2 Chinese LiDAR Market and Trends
2.1 Installation
2.1.1 LiDAR enters the stage of Mass Production
2.1.2 Comparison of Domestic ADAS LiDAR Installation Solution
2.1.3 Comparison of Foreign ADAS LiDAR Installation Solution
2.1.4 Domestic Passenger Car LiDAR Installation
2.1.5 Domestic Passenger Car LiDAR Installation: by Brand/Model
2.1.6 Domestic Passenger Car LiDAR Installation: by Manufacturer type/Price
2.1.7 Domestic Passenger Car LiDAR Installation: by ADAS level/Supplier
2.2 Main Suppliers
2.2.1 Comparison of Layout of Major Domestic Suppliers
2.2.2 Comparison of LiDAR products of Major Domestic Suppliers
2.2.3 Financing of of Major Domestic Suppliers
2.2.4 Comparison Major Foreign LiDAR Suppliers
2.2.5 Market Share of LiDAR Suppliers
2.3 Development Trends and Challenges

3 Models Equipped with LiDAR in China
3.1 XPeng Motors
3.2 NIO
3.3 Li Auto
3.4 IM
3.5 HiPhi
3.6 Aion
3.7 Geely
3.8 Great Wall Motors
3.9 BYD
3.10 AITO
3.11 RISING AUTO
3.12 Other

4 Chinese Automotive LiDAR Suppliers
4.1 HESAI
4.2 RoboSense
4.3 Innovusion
4.4 Huawei
4.5 Livox
4.6 LeiShen Intelligent System
4.7 VanJee Technology
4.8 LiangDao Intelligence
4.9 Zvision
4.10 Benewake
4.11 SureStar
4.12 Tanway
4.13 Litra Technology
4.14 Lorentech
4.15 RichBeam (formerly known as Yinbing Technology)
4.16 LuminWave
4.17 Xuanguang Semiconductor
4.18 Beijing Guangmiao Technology
4.19 GENIUS PROS
4.20 Deepwater Optoelectronics
4.21 Oradar Technology
4.22 O-Net
4.23 Rayz Technologies
4.24 Senfoto
4.25 Liturex (Guangzhou) Co.Ltd

5 Foreign Automotive LiDAR Suppliers
5.1 Luminar
5.2 Innoviz
5.3 Aeva
5.4 Ouster
5.5 Valeo
5.6 AEye
5.7 Cepton
5.8 Blickfeld
5.9 Mobileye
5.10 Xenomatix
5.11 Opsys
5.12 Baraja
5.13 SiLC Technologies

For more information about this report visit https://www.researchandmarkets.com/r/7x8zeh

About ResearchAndMarkets.com

ResearchAndMarkets.com is the world's leading source for international market research reports and market data. We provide you with the latest data on international and regional markets, key industries, the top companies, new products and the latest trends.

Media Contact:

Research and Markets
Laura Wood, Senior Manager
[email protected] 

For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900

U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716

Logo: https://mma.prnewswire.com/media/539438/Research_and_Markets_Logo.jpg

 

Cision View original content:https://www.prnewswire.com/news-releases/global-and-china-automotive-lidar-industry-report-2023-from-outside-to-inside-the-cabin-lidar-makes-a-new-leap-302063184.html

SOURCE Research and Markets


[ Back To TMCnet.com's Homepage ]