SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

New Fabrication Approach Paves Way to Low Cost Mid-Infrared Lasers Useful for Sensing
[March 26, 2020]

New Fabrication Approach Paves Way to Low Cost Mid-Infrared Lasers Useful for Sensing


For the first time, researchers have fabricated high-performance mid-infrared laser diodes directly on microelectronics-compatible silicon substrates. The new lasers could enable the widespread development of low-cost sensors for real-time, accurate environmental sensing for applications such as air pollution monitoring, food safety analysis, and detecting leaks in pipes.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20200326005501/en/

Researchers have fabricated the first set of mid-infrared laser diodes directly on microelectronics-compatible silicon substrates. The image on the bottom shows the various layers of the laser in a close-up of the section marked in the top image. Credit: Eric Tournié, University of Montpellier

Researchers have fabricated the first set of mid-infrared laser diodes directly on microelectronics-compatible silicon substrates. The image on the bottom shows the various layers of the laser in a close-up of the section marked in the top image. Credit: Eric Tournié, University of Montpellier

"Most optical chemical sensors are based on the interaction between the molecule of interest and mid-infrared light," said research team leader Eric Tournié from the University of Montpellier in France. "Fabricating mid-infrared lasers on microelectronics-compatible silicon can greatly reduce their cost because they can be made using the same high-volume processing techniques used to make the silicon microelectronics that power cell phones and computers."

The new fabrication approach is described in Optica, The Optical Society's (OSA) journal for high impact research. The work was conducted at the EXTRA facilities and as part of the REDFINCH consortium, which is developing miniaturized, portable low-cost optical sensors for chemical detection in both gases and liquids.



"For this project, we are working upstream by developing photonic devices for future sensors," said Tournié. "At a later stage, these new mid-infrared lasers could be combined with silicon photonics components to create smart, integrated photonic sensors."

Industry-compatible fabrication


Laser diodes are made of semiconductor materials that convert electricity into light. Mid-infrared light can be created using a type of semiconductor known as III-V. For about a decade, the researchers have been working on depositing III-V semiconductor material on silicon using a method known as epitaxy.

Although the researchers previously demonstrated lasers on silicon substrates, those substrates were not compatible with industry standards for microelectronics fabrication. When using industry-compatible silicon, differences in the material structures of the silicon and the III-V semiconductor cause defects to form.

"A particular defect called an anti-phase boundary is a device killer because it creates short-circuits," said Tournié. "In this new work, we developed an epitaxial approach that prevents these defects from reaching the active part of a device."

The researchers also improved the process used to fabricate the laser diode from the epitaxial material. As a result, they were able to create an entire laser structure on an industry-compatible silicon substrate with a single run of an epitaxial tool.

High-performance lasers

The researchers demonstrated the new approach by producing mid-infrared laser diodes that operated in continuous-wave mode and exhibited low optical losses. They now plan to study the lifetime of the new devices and how that lifetime relates to the fabrication and operation mode of the devices.

They say that once their method is fully mature, epitaxy of lasers on large silicon substrates (up to 300 millimeters across) using silicon microelectronics tools will improve control of the fabrication process. This will, in turn, further reduce laser fabrication costs and enable the design of new devices. The new lasers could also be combined with passive silicon photonics integrated circuits or CMOS technology to create small, low cost, smart photonic sensors for gas and liquid measurements with high sensitivity.

"The semiconductor material we work with allows fabrication of lasers or photodetectors operating in a broad spectral range, from 1.5 microns (telecom band) to 25 microns (far infrared)," said Tournié. "Our fabrication method can be applied in any field where one needs to integrate III-V semiconductors on silicon platforms. For example, we have already fabricated quantum-cascade lasers emitting at 8 microns by applying this new epitaxial approach."

Paper: M. R. Calvo, L. M. Bartolomé, M. Bahriz, G. Boissier, L. Cerutti, J.-B. Rodriguez, E. Tournié, "Mid-infrared laser diodes epitaxially grown on on-axis (001) Silicon," Optica, 7, 4, 263-266 (2020).
DOI: https://doi.org/10.1364/OPTICA.388383

About Optica

Optica is an open-access, journal dedicated to the rapid dissemination of high-impact peer-reviewed research across the entire spectrum of optics and photonics. Published monthly by The Optical Society (OSA), Optica provides a forum for pioneering research to be swiftly accessed by the international community, whether that research is theoretical or experimental, fundamental or applied. Optica maintains a distinguished editorial board of more than 60 associate editors from around the world and is overseen by Editor-in-Chief Prem Kumar, Northwestern University, USA. For more information, visit Optica.

About The Optical Society

Founded in 1916, The Optical Society (OSA) is the leading professional organization for scientists, engineers, students and business leaders who fuel discoveries, shape real-life applications and accelerate achievements in the science of light. Through world-renowned publications, meetings and membership initiatives, OSA provides quality research, inspired interactions and dedicated resources for its extensive global network of optics and photonics experts. For more information, visit osa.org.


[ Back To TMCnet.com's Homepage ]









Technology Marketing Corporation

2 Trap Falls Road Suite 106, Shelton, CT 06484 USA
Ph: +1-203-852-6800, 800-243-6002

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2020 Technology Marketing Corporation. All rights reserved | Privacy Policy