Worldwide Inductor Market Insights, 2020 to 2025 - Increasing Demand for Wireless & Connected Devices, Rising Adoption of Electric Vehicles, Growing Inception of 5G Technology
DUBLIN, Feb. 7, 2020 /PRNewswire/ -- The "Inductor Market by Inductance (Fixed, Variable), Type (Wire wound, Multilayered, Molded, Film), Core Type (Air, Ferrite, Iron), Shield Type (Shielded, Unshielded), Mounting Technique, Vertical, Application, Geography - Global Forecast 2025" report has been added to ResearchAndMarkets.com's offering.
The global inductor market was valued at USD 3.8 billion in 2019 and is projected to reach USD 4.7 billion by 2025; it is expected to grow at a CAGR of 4.19% from 2020 to 2025.
This research report categorizes the global inductor market based on inductance, type, core type, shield type, mounting technique, application, vertical and geography. The report describes major drivers, restraints, challenges, and opportunities pertaining to the inductor market and forecasts the same till 2025.
Major driving factors of the inductor market are the increasing demand for consumer electronics that require a large number of inductors and the rising adoption of electric vehicles. Recent advancements in wireless technologies such as 4G and 5G have increased the scope for electronic components in a wide range of applications in industrial and commercial sectors.
Wire-wound inductors are expected to continue to hold largest market share during forecast period
Wire-wound inductors have a core made of magnetic metals such as iron or ferrite with a wire wound around it. Unwanted radio frequencies can interfere with audio sound quality and disrupt electrical circuits. Thus, wire-wound inductors are used as they can block or filter radio frequencies. They are typically found in car audio systems and electronic control units (ECUs) and also in electronic equipment used in communication infrastructures and mobile base stations.
They are mainly used in the high-frequency circuits of mobile communication equipment, such as wireless LAN, mobile phones, broadband components, RFID tags, RF transceivers, Bluetooth, Wireless PDA, and security systems. Wire-wound inductors are larger in size and their performance is twice than that of multilayered inductors of the same size. Wire-wound inductors have the largest market share as the manufacturing costs involved are less compared with other types of inductors and they provide a high inductance value.
Air-core and Ferrite-core inductors are the fastest growing during the forecast period
An air core inductor has air inside its windings and does not depend on a ferromagnetic material to achieve its specified inductance. Its inductance is unaffected by the current it carries. These inductors are designed to perform at high frequencies of 1 GHz as ferromagnetic cores tend to have losses above 100 MHz. These inductors are used at high frequencies as they are free from energy losses, called core losses, which increase with frequency. A few of the application areas of these types of inductors are TV and radio receivers.
A ferromagnetic core uses iron or ferrite materials to increase inductance. It offers higher resistance compared with other inductor core types. Ferrite core inductors are used in surface acoustic wave (SAW) filters and voltage-controlled oscillator (VCO) circuits for telecommunication, hard disks, notebook computers, and other electronic equipment. Several applications associated with ferrite core inductors are broadband transformers, noise filters, power transformers, converter and inverter transformers, and others.
Consumer Electronics vertical to hold largest market share of inductor market in 2020
Consumer electronic products are vulnerable to operational threats from voltage transients such as lightning and electro-static discharge (ESD), short circuits, or overload conditions. These products must comply with the ongoing regulatory standards for safe and energy-efficient operation, transmission, and the distribution of power/signal.
The growing demand for consumer electronics across the world, such as smartphones, tablets, portable gaming consoles, laptops, and set-top boxes is the major factor driving the demand for various inductors. The consumer electronics vertical makes the highest use of inductors. Inductors in consumer electronics are used for ower supply in various complex circuits to manage current, and also, as filters in circuits to cut off undesirable frequencies. Thus, the consumer electronics vertical is expected to have the largest market share of the inductor market.
APAC is largest and fastest-growing market
The growth of the inductor market in APAC is driven mainly by the growth of the consumer electronics market in the region. APAC is witnessing dynamic changes in terms of the adoption of new technologies across various industries. As APAC has low labor costs, most of the inductors are manufactured in APAC and are exported to various regions. There is an extensive rise in the demand for power, which is increasing the need for power management and thereby, accelerating the demand for inductors.
Key Topics Covered
1 Introduction
2 Research Methodology
3 Executive Summary
4 Premium Insights 4.1 Inductor Market, 2020-2025 (USD Billion) 4.2 Market, By Shield Type 4.3 Market in APAC, By Vertical and Country 4.4 Market, By Mounting Technique 4.5 Market, By Application 4.6 Market, By Vertical 4.7 Market, By Region
5 Market Overview 5.1 Market Dynamics 5.1.1 Drivers 5.1.1.1 Increasing Innovations and Developments in Consumer Electronic Products 5.1.1.2 Growing Trend of Smart Cities and Smart Homes That Require Energy-Efficient Electronic and Electrical Systems 5.1.2 Restraints 5.1.2.1 Fluctuating Prices of Raw Materials, Especially Copper 5.1.2.2 Longer Lead Time of Inductors 5.1.3 Opportunities 5.1.3.1 Increasing Demand for Wireless and Connected Devices 5.1.3.2 Rising Adoption of Electric Vehicles 5.1.3.3 Growing Inception of 5G Technology 5.1.4 Challenges 5.1.4.1 Increasing Complexity Due to Miniaturization of Inductors
6 Inductor Market, By Inductance 6.1 Introduction 6.2 Fixed Inductors 6.2.1 Increase in Demand for Fixed Inductors in Near Future 6.3 Variable Inductors 6.3.1 Rise in Use of Variable Inductors in High-Frequency Applications Such as TV and Radio Sets
7 Inductor Market, By Type 7.1 Introduction 7.2 Film Type 7.2.1 Thin Film 7.2.1.1 Increased Demand Due to Proliferation of RF Technology 7.2.2 Thick Film 7.2.2.1 More Precise Process Compared With Multilayered Type 7.3 Multilayered 7.3.1 Provide High-Quality Factor and Help in Further Miniaturization of Electronic Circuits 7.4 Wire Wound 7.4.1 Bobbin Type 7.4.1.1 Varying Design in Terms of Power Rating and Current Levels 7.4.2 Toroidal Type 7.4.2.1 Low Magnetic Flux Leakage Due to Circular Shape of Toroid 7.5 Molded Type 7.5.1 Offer Advantages Including High DC Bias and High Reliability
8 Inductor Market, By Core Type 8.1 Introduction 8.2 Air Core 8.2.1 Ceramic Core 8.2.1.1 Usually Adopted in High-Frequency and High-Current Applications 8.2.2 Phenolic Core 8.2.2.1 Commonly Used for High-Frequency Applications 8.3 Ferromagnetic/Ferrite Core 8.3.1 Soft Ferrites 8.3.1.1 Current Losses are Very Low 8.3.2 Hard Ferrites 8.3.2.1 Inductance Level is Very High 8.4 Iron Core 8.4.1 Help in Applications Requiring High Inductance
9 Inductor Market, By Shield Type
10 Inductor Market, By Mounting Technique 10.1 Introduction 10.2 Surface Mount 10.2.1 Can Be Easily Mounted on PCB and are Smaller in Size 10.3 Through Hole 10.3.1 Extremely Reliable and Provide Strong Mechanical Bonds
11 Inductor Market, By Application 11.1 Introduction 11.2 General Circuits 11.2.1 Inductors are Combined With Capacitors and Resistors to Create Filters for Analog Circuits 11.3 Power Applications 11.3.1 Inductors Act as Energy Storage Devices and Produce DC Currents 11.4 High-Frequency Applications 11.4.1 Radio Communication Systems is Largest Application Area for High-Frequency Circuits
12 Inductor Market, By Vertical 12.1 Introduction 12.2 Automotive 12.2.1 Adoption of Electric Vehicles Drives Market for Inductors 12.3 Industrial 12.3.1 Inductors With High-Current Storing Capacity are Used for Power Supply 12.4 RF & Telecommunication 12.4.1 Wire-Wound Type Inductors are Preferred Due to Their High-Current Handling Capabilities 12.5 Military & Defense 12.5.1 High-Accuracy and Light-Weight Inductors are Preferred for Military Applications 12.6 Consumer Electronics 12.6.1 Increased Demand for Compact Sized Consumer Electronics is Driving Demand for Inductors 12.7 Transmission & Distribution 12.7.1 High Current Handling Capacity Inductors are Preferred for Power Supply 12.8 Healthcare 12.8.1 High Reliability and Compact Sized Inductors are Preferred in This Vertical
13 Inductor Market, By Region 13.1 Introduction 13.2 North America 13.2.1 US 13.2.1.1 Rapid Adoption of Wireless Charging Technology Drives Inductor Market in US 13.2.2 Canada 13.2.2.1 Robust Demand for Consumer Electronics Accelerates Market for Inductors 13.2.3 Mexico 13.2.3.1 Continued Growth of Electronics Industry Drives Market for Inductors 13.3 Europe 13.3.1 Germany 13.3.1.1 High Implementation of Industry 4.0 and Robotics 13.3.2 UK 13.3.2.1 Increased Demand for Inductors in RF & Telecommunication Sector 13.3.3 France 13.3.3.1 Increase in Number of Mobile Devices 13.3.4 Italy 13.3.4.1 Rapid Industrial Automation 13.3.5 RoE 13.3.5.1 Cheap Labor Cost Leading to Increasing Investments 13.4 APAC 13.4.1 China 13.4.1.1 Growing Market for Automobiles and Consumer Electronics 13.4.2 India 13.4.2.1 Increasing Government Initiatives Including Make in India 13.4.3 Japan 13.4.3.1 Rising Demand for Inductors Due to Presence of Largest Electronics Manufacturing Industry 13.4.4 South Korea 13.4.4.1 Growing Demand for Smart Homes and Smart Cities 13.4.5 RoAPAC 13.4.5.1 Increasing Adoption of Smart Grids and High-Speed Fiber Optics 13.5 RoW 13.5.1 South America 13.5.1.1 High Market Growth Owing to Leading Electronics Manufacturing Countries in Brazil 13.5.2 Middle East & Africa 13.5.2.1 Increased Demand for Power Inductors Due to Oil & Gas Fields in Middle East
14 Competitive Landscape 14.1 Overview 14.2 Competitive Leadership Mapping 14.2.1 Visionary Leaders 14.2.2 Dynamic Differentiators 14.2.3 Innovators 14.2.4 Emerging Companies 14.3 Competitive Benchmarking 14.3.1 Strength of Product Portfolio (25 Companies) 14.3.2 Business Strategy Excellence (25 Companies) 14.4 Ranking Analysis of Key Players in Inductor Market 14.5 Competitive Situations and Trends: 14.5.1 Acquisitions 14.5.2 Product Launches and Developments:
15 Company Profiles 15.1 Key Players 15.1.1 Murata Manufacturing 15.1.2 TDK 15.1.3 Vishay Intertechnology 15.1.4 TAIYO YUDEN 15.1.5 Chilisin 15.1.6 Delta Electronics 15.1.7 Panasonic 15.1.8 ABC Taiwan Electronics 15.1.9 Pulse Electronics 15.2 Right to Win 15.3 Other Key Players 15.3.1 Coilcraft 15.3.2 Shenzhen Sunlord Electronics 15.3.3 Bourns 15.3.4 Sumida 15.3.5 ICE Components 15.3.6 AVX 15.3.7 Bel Fuse 15.3.8 Falco Electronics 15.3.9 GCi Technologies 15.3.10 Wurth Elektronik 15.3.11 Samsung-Electro Mechanics (SEMCO)
For more information about this report visit https://www.researchandmarkets.com/r/i2pvzo
Research and Markets also offers Custom Research services providing focused, comprehensive and tailored research.
Media Contact:
Research and Markets Laura Wood, Senior Manager [email protected]
For E.S.T Office Hours Call +1-917-300-0470 For U.S./CAN Toll Free Call +1-800-526-8630 For GMT Office Hours Call +353-1-416-8900
U.S. Fax: 646-607-1907 Fax (outside U.S.): +353-1-481-1716
View original content:http://www.prnewswire.com/news-releases/worldwide-inductor-market-insights-2020-to-2025---increasing-demand-for-wireless--connected-devices-rising-adoption-of-electric-vehicles-growing-inception-of-5g-technology-301000936.html
SOURCE Research and Markets
[ Back To TMCnet.com's Homepage ]
|