TMCnet News
L-3 Cincinnati Electronics Selects Cypress to Manufacture Readout Integrated Circuits for Thermal Imaging ApplicationsSAN JOSE, Calif. & MASON, Ohio --(Business Wire)-- Cypress Semiconductor Corp. (News - Alert) (NASDAQ: CY) today announced it has been selected by L-3 Cincinnati Electronics, a division of L-3 Communications (NYSE: LLL), as a supply partner to manufacture its Readout Integrated Circuits (ROICs). L-3 CE will design and manufacture its state-of-the-art ROICs for its cooled infrared detectors using Cypress's proprietary process technology at the Cypress Foundry Solutions wafer fabrication facility in Bloomington, Minnesota. L-3 CE selected Cypress based on the potential for significant manufacturing yield enhancements for large-die ROIC devices. The ROICs will be based on Cypress's S8™ mixed-signal 130-nanometer flash-based SONOS (Silicon Oxide Nitride Oxide Silicon) process technology. SONOS is compatible with standard CMOS technologies and offers numerous advantages, including high endurance and low power. Due to the large die size of infrared sensor ROICs, L-3 CE looked for a manufacturing partner that could provide the lowest percentage of defects for higher yield. L-3 CE also wanted a partner with proven expertise in "stitching," or the ability to process dice larger than standard stepper wafer handling equipment can handle. Cypress meets these requirements by combining its 130-nm mixed-signal front-end process with the low-defect density and design rules for precise stitching of its 90-nm aluminum back-end of line process. "Based on Cypress's comprehensive defect control strategy, we are pleased to expand our supplier base to meet the growing demand for large-format thermal imaging," said Vance King, Vice President and General Manager of IR Products at L-3 Cincinnati Electronics. "Our cutting-edge, high-definition sensing technology, combined with Cypress's proven, high-volume 8-inch 130-nm technology and manufacturing expertise, enables us to achieve the performance and affordable cost requirements of U.S. defense markets." "This agreement continues to validate Cypress's commitment to high-quality, low-cost manufacturing in the United States," said Mehran Sedigh, Vice President of Front-End Manufacturing at Cypress. "We have continued to expand our base of leading-edge customers, such as L-3, for our Minnesota wafer fab, and we expect this trend to continue as more companies see the value and service that Cypress Foundry Solutions offers." The agreement will leverage Cypress's advanced process technology and transfer expertise along with its Trusted Fab accreditation and quality certifications for TS16949 and ISO14001. L-3 CE and Cypress expect to have te product qualified by late 2014. Cypress manufactures high-performance, mixed-signal, programmable solutions for a variety of markets, including defense and automotive, proving a strong fit for L-3 CE, a leader in infrared solutions for military and commercial applications. Learn More About Cypress
About L-3 Cincinnati Electronics L-3 Cincinnati Electronics (L-3 CE) is world-renowned for its expertise in the areas of electro-optical/infrared (EO/IR) detection as well as space and missile electronics. To learn more about L-3 CE, please visit the company's website at www.L-3com.com/ce. About L-3 Communications (News - Alert) Headquartered in New York City, L-3 employs approximately 51,000 people worldwide and is a prime contractor in C3ISR (Command, Control, Communications, Intelligence, Surveillance and Reconnaissance) systems, platform and logistics solutions, and national security solutions. L-3 is also a leading provider of a broad range of electronic systems used on military and commercial platforms. The company reported 2012 sales of $13.1 billion. To learn more about L-3, please visit the company's website at www.L-3com.com. L-3 uses its website as a channel of distribution of material company information. Financial and other material information regarding L-3 is routinely posted on the company's website and is readily accessible. About Cypress's Fab 4 Cypress operates its own wafer fabrication facility in Bloomington, Minnesota, and offers access to this facility as a Specialty Foundry Solutions provider. This 8-inch wafer fab manufactures in high volume down to the 90-nm node with 65-nm capability. It offers process technologies that integrate SONOS-based nonvolatile memory and precision analog/mixed-signal capabilities. The facility can handle ITAR material, and it has been accredited as a Category 1A Trusted Fab for fabrication, design, and testing of U.S. DoD Trusted Microelectronics. More information on Cypress Foundry Solutions is available online at www.cypress.com/go/foundry. About Cypress Cypress delivers high-performance, mixed-signal, programmable solutions that provide customers with rapid time-to-market and exceptional system value. Cypress offerings include the flagship PSoC® 1, PSoC 3, PSoC 4 and PSoC 5LP programmable system-on-chip families. Cypress is the world leader in capacitive user interface solutions including CapSense® touch sensing, TrueTouch® touchscreens, and trackpad solutions for notebook PCs and peripherals. Cypress is a world leader in USB controllers, which enhance connectivity and performance in a wide range of consumer and industrial products. Cypress is also the world leader in SRAM and nonvolatile RAM (News - Alert) memories. Cypress serves numerous major markets, including consumer, mobile handsets, computation, data communications, automotive, industrial and military. Cypress trades on the NASDAQ Global Select Market under the ticker symbol CY. Visit Cypress online at www.cypress.com. Cypress, the Cypress logo, TrueTouch, PSoC, and CapSense are registered trademarks and S8 is a trademark of Cypress Semiconductor Corp. All other trademarks are property of their owners.
|
