SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

CADWorx® webinar September 21st to discuss how to mitigate risk-based inspection results in existing plants
[September 12, 2017]

CADWorx® webinar September 21st to discuss how to mitigate risk-based inspection results in existing plants


HOUSTON, Sept. 12, 2017 (GLOBE NEWSWIRE) -- CADWorx & Analysis Solutions will host a webinar on September 21, 2017 at 10:00 a.m. CDT that will discuss risk-based inspection of pipes, valves, pumps, vessels, exchangers and structures within existing plants which often uncover signs of corrosion and aging that can lead to failure. The webinar will demonstrate how to apply CADWorx to these existing conditions and leverage analysis software to determine fitness for service (FFS) and identify actions that will help to remediate these issues before they lead to costly failures. The webinar leader will be Michael Smith, CADWorx business development manager.  

For more information about the webinar, visit http://coade.typepad.com/coadeinsider/2017/09/cadworx-webinar-mitigating-rbi-results-in-existing-plants.html. To register, visit http://icas.intergraph.com/20170921-CADWorx-Webinar-RBI.

For more information on CADWorx, visit http://hexagonppm.com/products/3d-product-family/cadworx. For information about analysis products, visit http://hexagonppm.com/products/analysis-product-family.

About CADWorx & Analysis Solutions
CADWorx & Analysis Solutions is part of Hexagon PPM. It develops and supports the following products: CADWorx®, for plant design; CAESAR II®, for pipe stress analysis; PV Elite®, for pressure vessel analysis; and GT STRUDL®, for structural analysis.


Hexagon PPM is the world’s leading provider of enterprise engineering software enabling smarter design and operation of plants, ships and offshore facilities. Hexagon PPM is part of Hexagon (Nasdaq Stockholm: HEXA B; http://www.hexagon.com), a leading global provider of information technology solutions that drive productivity and quality across geospatial and industrial landscapes.

© 2017 Intergraph Corporation d/b/a Hexagon PPM. Hexagon PPM is part of Hexagon.  All rights reserved. Hexagon PPM and the Hexagon PPM logo are trademarks of Hexagon or its subsidiaries in the United States and other countries.

Contact
Gary Carson
+1.713.668.8550
gcarson@equamark.com

Primary Logo


[ Back To TMCnet.com's Homepage ]






Technology Marketing Corporation

35 Nutmeg Drive Suite 340, Trumbull, Connecticut 06611 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2017 Technology Marketing Corporation. All rights reserved | Privacy Policy