TMCnet News

Furukawa Electric Announces Hand-Held Single Fiber Fusion Splicer FITELNINJA NJ001
[February 23, 2015]

Furukawa Electric Announces Hand-Held Single Fiber Fusion Splicer FITELNINJA NJ001


ORLANDO, Fla., Feb. 23, 2015 /PRNewswire/ -- BICSI, Booth 407 -- Furukawa Electric Co., Ltd. is launching sales of the FITELNINJA NJ001 Fusion Splicer. This hand-held single fiber fusion splicer is ideal for working on LAN (Local Area Network) and FTTx (Fiber to the home/building/node/curb, etc.) connections.

As robust as its predecessor the S123C, the FITELNINJA is considerably smaller and lighter offering the operator optimal ease of use, portability and durability.

Development
The ongoing expansion of FTTx networks worldwide calls for affordable, compact and light fusion splicers that are also robust and can safely be used in demanding environments including high, narrow or dark places both inside the home and on construction sites.  Furukawa Electric has designed the FITELNINJA in order to meet these requirements.

Features

  • Compact and light weight
    Size reduction of approximately 40% from its predecessor (S123C).
  • Ease of use
    • The splicing chamber has been redesigned; 4 times more space has been created around the fiber holders, providing enough room for the fingers to facilitate fiber loading.
    • The 3 LED lamps illuminating the splicing chamber make it easier to work in a dark environment.
  • Durability
    • Shock resistance
      The 4 rubber pads on the corners of the machine increase the shock resistance of the machine. Standard operations could be carried out after being dropped from 76cm on 5 different angles. *1)
    • Dust & Water resistance
      Standard operations could be properly carried out after having conducted IP52 equivalent tests.*2) *3)
  • Easy maintenance
    • The FITELNINJA features the industry's first detachable V-groove, and retains the tool-less electrode replacement and mirror free alignment system of its predecessor the S123C. These features make it easier to maintain the fusion splicer in an optimal condition.
  • Fast operation
    Incorporates fast splicing (approximately 13 seconds*4)) with low loss as well as fast heating (approximately 20 seconds*5)) for single fibers.
  • Battery Capacity
    With its low power consumption, the NJ001 is capable of performing 100 splicing and heating cycles on a single battery charge.
  • Compatibility with Splice-on-Connectors (SOC)
    The detachable heater clamp aids ease of operation for SOCs heat sleeve shrinking process.

Specifications





Applicable Fibers

SM, MM, DSF, NZD, BIF/UBIF

Cladding Diameter

125 micrometers

Splice Time

13 seconds*4)

Typical Heating Time

17 seconds (40 mm sleeve) *5)

20 seconds (60 mm sleeve) *5)

Battery Capacity

100 cycles *6)

Dimension

139W x 176D x 71H mm (including Rubber Pads)

Weight

970 g (including Battery)

*1:

These tests were performed at Furukawa Electric Co., Ltd laboratories and does not guarantee that the machine will always be undamaged under these conditions. Impact angles are front, rear, bottom, left and right hand side.

*2:

IPX2 rating drip proof means that the machine can be exposed to 3mm/min drips for 10 min with 15-degree tilt and still function.

*3:

IP5X rating dust proof means that the machine can be exposed to dust particles with a diameter of 0.1 micrometer to 25 micrometers for 8 hours and still function.

*4:

Using semi-auto mode.

*5:

Using pre-heating mode, this value may vary depending on the type of sleeves.

*6:

The number of splicing and heating cycles the machine can perform with a fully charged brand new battery at room temperature (20 degrees C). This may vary depending on the battery status and operating environment.

About Furukawa Electric Co., Ltd.
Furukawa Electric Co., Ltd. (www.furukawa.co.jp/english) is an $11 billion global leader in the design, manufacture and supply of fiber optic products, network products, electronics components, power cables, nonferrous metals, and other advanced technology products. Headquartered in Tokyo, Japan, Furukawa operates production facilities on five continents around the globe, including OFS in the U.S.A., Europe and China.

To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/furukawa-electric-announces-hand-held-single-fiber-fusion-splicer-fitelninja-nj001-300039471.html

SOURCE Furukawa Electric Co., Ltd.


[ Back To TMCnet.com's Homepage ]