TMCnet News
Probabilistic Analysis and Randomization Provide the Answer to Timing Challenges for Next Generation Critical Embedded Systems(ENP Newswire Via Acquire Media NewsEdge) ENP Newswire - 25 March 2014 Release date- 21032014 - Over the next decade, the embedded software industry will face a massive transition to multicore and manycore processors. This architectural revolution intensifies an already existing severe challenge to the development of Critical Real-Time Embedded Systems (CRTES), namely the need to show that software timing behaviour is always correct during operation. Previous research carried out in the EU-funded PROARTIS project has demonstrated how this threat can be mitigated through the application of randomization. PROXIMA (Probabilistic real-time control of mixed-criticality multicore and manycore systems), a 36-month project funded under the EU FP7 research programme, builds on the results of PROARTIS, and will result in a comprehensive suite of hardware and software platforms and probabilistic analysis methods integrated into commercial design, development and verification tools. Current CRTES, based on relatively simple single core processors, are already extremely difficult to analyse for correct timing behaviour. The advent of multicore and manycore platforms exacerbates this problem, rendering existing software performance and worst case execution time (WCET) analysis techniques ineffectual. A new approach is needed. PROXIMA aims to provide this new approach. The PROXIMA project asserts that the timing behaviour of mixed-criticality CRTES executing on multicore and manycore platforms can be analysed effectively via probabilistic techniques. Outcomes of the PROXIMA project include: bringing the probabilistic approach to a state of technological readiness, building on key contributions by each of the partners, and making the probabilistic techniques applicable to the industry sectors of Aerospace, Automotive, Rail and Space. Project coordinator, Francisco Cazorla commented 'The PROARTIS project has reached its goals in defining the theoretical foundations and providing initial evidence of how probabilistic analysis techniques can be applied to analyse the timing behaviour of complex hardware and software when their timing behaviour is randomised. In PROXIMA our focus will be on industrialising some of the technologies developed in PROARTIS for mixed-criticality multicore systems and extending the theoretical foundations to cover manycore systems. This two-fold approach ensures high impact in the real-time industry in both the short term and the long term'. The partners participating in the PROXIMA project are: Barcelona Supercomputing Center - Centro Nacional de Supercomputacion (Spain) will be implementing time randomization solutions at processor and compiler level. Rapita Systems Ltd (UK) will extend their RapiTime WCET analysis tool to encompass the new probabilistic analysis techniques. Sysgo S.A.S. (France) will upgrade their PikeOS RTOS to support the probabilistic approach. Universita di Padova (Italy) will design the software infrastructure underneath the application and develop timing analysis techniques for multicore and manycore processors. Institut National de Recherche en Informatique et en Automatique (INRIA, France) will propose probabilistic and statistical timing analyses and develop the associated prototype tools. Aeroflex Gaisler (Sweden) will develop system on chip (SoC) designs that include probabilistic extensions. Airbus Operations SAS (France) will provide an avionics case study and will investigate the readiness for certification of the PROXIMA solutions. University of York (UK) will research and develop probabilistic and deterministic techniques and prototype tools for the analysis of Worst-Case Execution Times (WCET) and end-to-end timing behaviour. Airbus Defence and Space (France) will design case studies that are representative of current space activities. Ikerlan S.COOP (Spain) will provide a case study representative of the rail industry. Infineon Technologies UK Ltd will validate the PROXIMA requirements against automotive needs, and will also provide an automotive case study. The PROXIMA project is scheduled to take three years to complete and has a budget of EUR6,793,991. The EC contribution to this project is EUR4.65M. The contract number is 611085. For further information, visit the project website at www.proxima-project.eu or contact: The PROXIMA Coordinator, Barcelona Supercomputing Center - Centro Nacional de Supercomputacion. Francisco J. Cazorla, E-mail: [email protected] The PROXIMA Dissemination leaders, Liliana Cucu-Grosjean ([email protected]) from INRIA for academic and research aspects and Andrew Coombes ([email protected]) from Rapita Systems for industrial and commercial aspects. (c) 2014 Electronic News Publishing - |