[May 16, 2013] R&S increases frequency range of FSW signal and spectrum analyzer Tweet May 16, 2013 (Datamonitor via COMTEX) -- Rohde & Schwarz, or R&S, a supplier of solutions in the fields of test and measurement, broadcasting, radiomonitoring and radiolocation, has increased the frequency range of its R&S FSW signal and spectrum analyzer to 50 GHz. In conjunction with analysis bandwidths of up to 320 MHz, the new microwave model will support R&D measurements and provide help for radar and satellite applications. According to the company, the new R&S FSW50 signal and spectrum analyzer is ideal in the development, testing, verification and production of transmitters and components such as those used in radar applications and satellite and military communications systems. The analyzer covers the frequency range from 2 Hz through 50 GHz. Using harmonic mixers from Rohde & Schwarz, the frequency range can be extended to 110 GHz. In addition, Rohde & Schwarz has doubled the analysis bandwidth of the R&S FSW50 from 160 MHz to 320 MHz. This allows the demodulation of wideband signals such as radar chirps up to 50 GHz. The R&S FSW50 offers wider dynamic range and is easier to calibrate, the company said. The R&S FSW50 is a microwave analyzer that is particularly useful in industrial and university R&D laboratories. Aerospace and defense calibration labs requiring a maximum input frequency of 50 GHz or high repeatability of results will also benefit from the instrument, the company added. The low DANL of -164 dBm/Hz in the microwave range with activated preamplifier allows small spurious emissions to be detected such as those found in radar signals. The analyzer offers high sensitivity close to the carrier even at 50 GHz, featuring a phase noise of -114 dBc (Hz) at 10 kHz from the carrier, the company reported. The integrated multistandard radio analyzer (MSRA) function of the R&S FSW50 makes it possible to measure spectrum and modulation parameters of differently modulated signals, including their correlation in time. The 12.1 inches (31 cm) touchscreen interface makes operation convenient, especially for complex measurement tasks. The MultiView function allows users to simultaneously display multiple measurements and different applications on the screen, the company concluded. http://www.datamonitor.com Republication or redistribution, including by framing or similar means, is expressly prohibited without prior written consent. Datamonitor shall not be liable for errors or delays in the content, or for any actions taken in reliance thereon [ Back To TMCnet.com's Homepage ]