SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

AVX Enhances TCJ Series with New 100V & 125V Tantalum Polymer SMD Capacitors
[November 16, 2012]

AVX Enhances TCJ Series with New 100V & 125V Tantalum Polymer SMD Capacitors


Nov 16, 2012 (Close-Up Media via COMTEX) -- AVX Corp., a manufacturer of passive components and interconnect solutions, is expanding its TCJ Series with two new high-voltage tantalum polymer chip capacitors.

According to a release, rated for 100V and 125V - nearly twice the rated voltage of similar products currently on the market - AVX's new surface mount, tantalum polymer chip capacitors provide capacitance and low ESR for a broad range of high-voltage applications, including telecommunications equipment, base stations, switching hubs, router and line filters, DC/DC converters in LED TVs and notebook computer power supplies, and a host industrial applications.

"The new, high-voltage TCJ Series capacitors provide design engineers with the ability to reduce the number of components on the board, increasing layout flexibility, as well as take up less board space than comparable aluminum electrolytic capacitors, which will enable the devices they're designed into, such as LCD monitors and LED TVs, to become even sleeker and more compact," said Dan Lane, marketing manager at AVX.

AVX's new 6.8F/100V and 3.3 F/125V TCJ Series tantalum polymer SMD chip capacitors maintain 20 percent recommended voltage detracting, which significantly extends the usable voltage range, and are capable of replacing up to two of the highest rated component values in this technology, which provides design engineers with greater flexibility regarding board design. Exhibiting reliability exceeding 1 percent per 1,000 hours at 85C and full-rated voltage, as well as a benign failure mode, which eliminates the ignition failures that can occur in standard MnO2 tantalum technology, the new capacitors are also exceedingly robust.


AVX's 100V and 125V TCJ Series SMD capacitors are rated for use from -55C to +105C, feature small case sizes (2924 for the 100V and 2917 for the 125V) and low profiles, and are halogen-free in accordance with the criteria for environmentally responsible product design that were recently adopted by several other major electronics manufacturers. Compatible with high-speed pick and place manufacturing processes, the new high voltage capacitors are available on 7" and 13" pure tin reels.

Engineering samples of AVX's new 100V and 125V tantalum polymer SMD chip capacitors are currently available upon request and will be made commercially available in the first quarter of 2013.

AVX Corp. is an international supplier of electronic passive components and interconnect solutions.

More information: www.avx.com ((Comments on this story may be sent to newsdesk@closeupmedia.com))

[ Back To TMCnet.com's Homepage ]






Technology Marketing Corporation

35 Nutmeg Drive Suite 340, Trumbull, Connecticut 06611 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2018 Technology Marketing Corporation. All rights reserved | Privacy Policy