[September 25, 2014] |
|
New TEGAM Microohmmeter Probes are Rugged and Comfortable
GENEVA, Ohio --(Business Wire)--
TEGAM,
Inc., a leading supplier of innovative microohmmeters, has just
introduced five new Kelvin probes. When used with TEGAM's R1L bond
meters or the 1740 or 1750 microohmeters, they enable engineers and
technicians to more easily make four-wire bonding and other
low-resistance measurements:
-
The BKP-10 Kelvin probes are designed for heavy-duty applications
where you must make four-wire surface resistance measurements on bonds
and other metallic surfaces. Pin-to-pin spacing is 0.19-in. (4.8 mm),
and the probe can be ordered with three types of pins, including a
spear point pin, a flat point pin for making surface resistance
measurements, and a serrated pin when a coating must be pierced. The
test leads are ten feet long and terminated with dual banana plugs on
¾" spacing for use with the R1L bond meters.
-
The MKP-6 and MKP-1750/5 Kelvin probes are designed for making
four-wire surface resistance measurements in tighter spaces.
Pin-to-pin spacing is 0.11-in. (2.8 mm), ensuring an operator
error-free measurement. These probes can be ordered with five types of
pins, including a spear point pin, a flat point pin, a serrated pin, a
spherical point pin, and a rotating pin. The test leads of the MKP-6
are ten feet long and terminated with dual banana plugs on 3/4"
spacing for use with the R1L bond meters. The test leads of the
MKP-1750/5 are five feet long and terminated with a connector
compatible with the TEGM 1740 and 1750 microohmmeters.
-
The MCP-6 and MCP-1750/5 Kelvin probes are designed for making
four-wire surface resistance measurements where space is at a premium.
This probe uses a unique coaxial pin with a 0.63-in. diameter that
allows four-wire resistance measurements in very tight spaces. The
test leads of the MCP-6 are ten feet long and terminated with dual
banana plugs on ¾" spacing for use with the R1L bond meters. The test
leads of the MCP-1750/5 are five feet long and terminated with a
connector compatible with the TEGAM 1740 and 1750 micro-ohmmeters.
According to Andy Brush, TEGAM CEO, no other company makes a hand-held
probe with such a small pin. "These probes enable four-wire measurements
in places inaccessible with other probes," he said.
Another unique feature is their ergonomics. "We designed the probe to
minimize hand fatigue in bench and field service applications," Brush
said.
About TEGAM Headquartered just east of Cleveland, Ohio,
TEGAM, Inc. specializes in the design, manufacture and support of a wide
variety of test, measurement and calibration instruments. TEGAM is the
worldwide leading manufacturer of RF power sensor calibration systems,
for commercial and military applications. Founded in 1979, TEGAM has
developed a wide variety of measurement instrumentation and markets its
products around the world through a network of technical representatives
and distributors in more than 40 countries.
TEGAM is internationally recognized for its offering of RF power sensor
calibration systems, RF attenuation measurement systems, AC ratio
standards and micro-ohmmeters. In addition, the company supplies LCR
meters, arbitrary waveform generators, high-voltage amplifiers, MEMS
engine driver systems, handheld thermometers, humidity meters and other
test and measurement solutions. TEGAM has recently introduced several
new products, including the R1L-E2A Intrinsically Safe Microohmmeter
(C-UL-US, ATEX), and the R1L-BR1 Microohmeter and Bond Tester Kit. For
more information visit www.tegam.com
or contact Sales at [email protected].
To learn more about TEGAM's probe product offerings, visit: http://www.tegam.com/category.asp?categoryID=54.
Click here for a link to a high resolution image: http://www.ggcomm.com/TGM/Microohmmeter_Probes.jpg.
[ Back To TMCnet.com's Homepage ]
|