TMCnet News
SEALSQ and IC'Alps Advance Chip-Level Post-Quantum Security for Connected Medical DevicesGeneva, Switzerland, Nov. 09, 2026 (GLOBE NEWSWIRE) -- Post-quantum secure elements, Trusted Platform Modules and custom ultra-low-power ASICs address the IoMT security readiness gap, with live medical demonstrations at Electronica 2026.
SEALSQ Corp (NASDAQ: LAES) ("SEALSQ" or "Company"), a company that focuses on developing and selling Semiconductors, PKI, and Post-Quantum technology hardware and software products, today outlined how SEALSQ and its subsidiary IC'Alps can help manufacturers build post-quantum cryptography (PQC) into next-generation Internet of Medical Things (IoMT) devices at the chip level. The initiative addresses a significant post-quantum readiness gap in connected healthcare. Forescout Research – Vedere Labs, reported by The HIPAA Journal found that only 6% of IoMT devices use SSH implementations that support PQC, compared with 50% of IT devices. The findings highlight the importance of incorporating post-quantum security into new medical-device designs, particularly as many existing devices have long operating lifecycles and limited upgrade options. A Readiness Gap Where Patient Care Depends on It
The risk is immediate because attackers can harvest encrypted data now and decrypt it once quantum computers are powerful enough. Forescout notes that patient data stays valuable for a lifetime and cannot be reset like a payment card. The report also frames PQC as a patient-safety issue. Cryptography protects commands sent to devices, device telemetry, medication orders and firmware signatures. Forescout classes regulated medical devices as low-agility assets, where a cryptographic change can depend on vendor release cycles, recertification or even hardware replacement. That makes device design the most effective point at which to act. Medical devices can remain in service for 10 to 20 years, so a design started today must be ready for the cryptography of the next two decades. Executive Commentary "Patient data stays sensitive for a lifetime, and a medical device can stay in service for many years," said Carlos Moreira, Founder, Chairman and CEO of SEALSQ. "That is why post-quantum security has to be designed in at the chip stage, not added once a device is on the market. The Forescout findings show how wide the gap is today. Together, SEALSQ and IC'Alps give manufacturers a practical way to close it in the devices they design next." “Our experience designing ASICs for active implantable medical devices has taught us to address patient safety, reliable operation and long battery life together, from the earliest design decisions,” said Jean-Luc Triouleyre, Managing Director and Co-Founder of IC'Alps. “We bring that track record in ultra-low-power design and power management to QASIC, integrating SEALSQ’s post-quantum security alongside sensing and processing while addressing the stringent energy constraints of implants, within the ISO 13485 quality framework our medical customers rely on.” From Standard Secure Chips to Custom Medical ASICs
That experience matters because post-quantum keys and signatures are larger than those of the cryptography they replace, while implants and wearables have strict limits on power and size. QASIC addresses these constraints at the semiconductor-design stage, when security can be designed alongside sensing, processing, safety and power management. SEALSQ's healthcare work also reaches the clinician workstation. In September 2026, iMTC Technology selected the QVault TPM183 for its Fingerprint Recognition Medical Mouse, giving the product a hardware root of trust and a migration path to PQC. Beyond chip-level security, SEALSQ offers Public Key Infrastructure (PKI) through its INeS PKI solution, enabling the issue of digital certificates to every element – the medical device, the physician base station, the cloud, the embedded application, the building network – and the certificate that signs every firmware. Provisioned at manufacturing and managed over the whole lifecycle of the device, these quantum-safe identities secure data connections and software updates, and ultimately patient data and life. These technologies are intended for new and next-generation products. Devices already in service will continue to need the measures Forescout recommends, including network segmentation, TLS 1.3 enforcement and PQC gateways. See It at electronica 2026 SEALSQ and IC'Alps will exhibit at Electronica 2026 in Munich from November 10 - 13, 2026 in Hall C6, Booth 670. The booth will run live demonstrations across applications including medical, and will present QS7001, VaultIC409, QVault TPM, QASIC and INeS ID. On November 13, 2026 at 11:50 a.m. CET, SEALSQ will give the keynote "Embedding certified secure hardware to simplify migration to post-quantum security standards" at the Embedded Systems World Forum. To book a meeting, visit www.sealsq.com/electronica_2026. About IC'ALPS IC'ALPS, a SEALSQ Company, is your one-stop-shop ASIC partner. Based in France (Grenoble and Toulouse), the company provides customers with a complete offering for Application Specific Integrated Circuits (ASIC) and Systems on Chip (SoC) development from circuit specification, mastering design in-house, up to the qualification, and the management of the entire production supply chain. Its 90+ engineers' areas of expertise include analogic, digital and mixed-signal circuits (sensor/MEMS interfaces, ultra-low power consumption, power management, high-resolution converters, high voltage, signal processing, ARM and RISC-V based multiprocessors architectures, hardware accelerators) on technologies from mature 0.18 µm down to advanced 1.8 nm, and from multiple foundries (TSMC, GlobalFoundries, Intel Foundry, X-FAB, ams-OSRAM, STMicroelectronics, UMC, DBH, etc.). The company is active worldwide in medical, automotive, industrial, IoT, AI, mil-aero and digital identity & security sectors. IC'ALPS is ISO 9001:2015, ISO 13485:2016, EN 9100:2018, Common Criteria certified, IATF 16949-ready, member of TSMC Design Center Alliance (DCA), GlobalFoundries GlobalSolutions™ Partner, ams Osram Preferred Partner, X-FAB's partner network, Intel Foundry Accelerator Design Service and Value Chain Alliance (DSA+VCA) and DB HiTek. About SEALSQ SEALSQ is a leading innovator in Post-Quantum Technology hardware and software solutions. Our technology seamlessly integrates Semiconductors, PKI (Public Key Infrastructure), and Provisioning Services, with a strategic emphasis on developing state-of-the-art Quantum Resistant Cryptography and Semiconductors designed to address the urgent security challenges posed by quantum computing. As quantum computers advance, traditional cryptographic methods like RSA and Elliptic Curve Cryptography (ECC) are increasingly vulnerable. SEALSQ is pioneering the development of Post-Quantum Semiconductors that provide robust, future-proof protection for sensitive data across a wide range of applications, including Multi-Factor Authentication tokens, Smart Energy, Medical and Healthcare Systems, Defense, IT Network Infrastructure, Automotive, and Industrial Automation and Control Systems. By embedding Post-Quantum Cryptography into our semiconductor solutions, SEALSQ ensures that organizations stay protected against quantum threats. Our products are engineered to safeguard critical systems, enhancing resilience and security across diverse industries. For more information on our Post-Quantum Semiconductors and security solutions, please visit www.sealsq.com. Forward-Looking Statements SEALSQ Corp is providing this communication as of this date and does not undertake to update any forward-looking statements contained herein as a result of new information, future events or otherwise.
|


