TMCnet News
Manufacturing PMI® at 55.5%; October 2026 ISM® Manufacturing PMI® ReportNew Orders Growing; Production Growing; Employment Growing; Supplier Deliveries Slowing; TEMPE, Ariz., Nov. 2, 2026 /PRNewswire/ -- Economic activity in the manufacturing sector expanded in October for the 10th consecutive month, say the nation's supply executives in the latest ISM® Manufacturing PMI® Report.
The report was issued today by Susan Spence, MBA, Chair of the Institute for Supply Management® (ISM®) Manufacturing Business Survey Committee. "The Manufacturing PMI® registered 55.5 percent in October, 1 percentage point above the September figure of 54.5 percent. The overall economy expanded for the 24th month in a row. (A Manufacturing PMI® above 47.5 percent, over a period of time, generally indicates an expansion of the overall economy.) The New Orders Index expanded for the 10th consecutive month after four straight readings in contraction, registering 55.5 percent, up 0.2 percentage point compared to September's figure of 55.3 percent. The October reading of the Production Index (59 percent) is 2.3 percentage points higher than the 56.7 percent recorded in September and the highest since November 2021 (60.5 percent). The Prices Index remained in expansion (or 'increasing' territory), registering 75.2 percent, a 2.7-percentage point decrease compared to September's reading of 77.9 percent. The Backlog of Orders Index registered 54.6 percent, down 1.8 percentage points compared to the 56.4 percent recorded in September. The Employment Index reading of 52.4 percent is down 0.3 percentage point from September's figure of 52.7 percent," says Spence. "The Supplier Deliveries Index indicated slowing performance for the 11th month in a row after one month in 'faster' territory. The reading of 59.1 percent is up 0.1 percentage point from its September reading of 59 percent. (Supplier Deliveries is the only ISM® PMI® Reports index that is inversed; a reading of above 50 percent indicates slower deliveries, which is typical as the economy improves and customer demand increases.) "The Inventories Index registered 51.4 percent, returning to expansion and up 2.8 percentage points compared to September's reading of 48.6 percent. The Customers' Inventories Index reading of 41.6 percent is the same as in September. "The New Export Orders Index gained 0.3 percentage points in October for a reading of 51.2 percent versus 50.9 percent in September. The Imports Index registered 52.9 percent, an increase of 1.9 percentage points compared to September's reading of 51 percent." Spence continues, "In October, U.S. manufacturing activity remained in expansion territory. Of the five subindexes that make up the PMI®, four (New Orders, Production, Supplier Deliveries and Inventories) grew faster than the previous month, while Employment growth slowed down by 0.3 percentage point. In October, general sentiment got worse for a third month in a row, with 34 percent of the comments positive and 66 percent negative (a 1-to-2 ratio of positive to negative sentiment). Among negative comments, pricing volatility was mentioned in 62 percent, longer lead times 41 percent, tariffs 25 percent and the Iran war 21 percent; most comments mentioned multiple factors. "In October, three of four demand indicators (the New Orders, Backlog of Orders and New Export Orders indexes) remained in expansion, and the Customers' Inventories Index remained in 'too low' territory, contracting at the same rate as last month. A 'too low' status for the Customers' Inventories Index is usually considered positive for future production. "Regarding output, the Production Index expanded for the 12th month in a row, with the positive-to-negative comment ratio improving to 2 positive comments for every negative one (compared to the 1.6-to-1 ratio in September). The Employment Index remained in expansion but lost 0.3 percentage point. The positive-to-negative comments ratio on Employment was 1.8-to-1 in October. "Finally, inputs (defined as supplier deliveries, inventories, prices and imports) were mixed, with the Supplier Deliveries Index increasing 0.1 percentage point, the Inventories Index gaining 2.8 percentage points and returning to expansion, and the Prices Index decreasing 2.7 percentage points. The Imports Index gained 1.9 percentage points, to 52.9 percent versus 51 percent in September. "Looking at the manufacturing economy, 6 percent of the sector's gross domestic product (GDP) contracted in October, compared to 2 percent in September, and 6 percent of manufacturing GDP was in strong contraction (defined as a composite PMI® of 45 percent or lower), compared to 2 percent in September. The share of sector GDP with a PMI® at or below 45 percent is a good metric to gauge overall manufacturing weakness. Of the six largest manufacturing industries, five (Machinery; Computer & Electronic Products; Transportation Equipment; Chemical Products; and Food, Beverage & Tobacco Products) expanded in October." The 12 manufacturing industries reporting growth in October — listed in order — are: Plastics & Rubber Products; Electrical Equipment, Appliances & Components; Machinery; Computer & Electronic Products; Textile Mills; Primary Metals; Transportation Equipment; Fabricated Metal Products; Furniture & Related Products; Chemical Products; Miscellaneous Manufacturing; and Food, Beverage & Tobacco Products. The three industries reporting a contraction in October are: Printing & Related Support Activities; Paper Products; and Nonmetallic Mineral Products. WHAT RESPONDENTS ARE SAYING
ISM® Manufacturing PMI® Report data is seasonally adjusted for the New Orders, Production, Employment and Inventories indexes. COMMODITIES REPORTED UP/DOWN IN PRICE AND IN SHORT SUPPLY Commodities Up in Price Commodities Down in Price Commodities in Short Supply *Indicates both up and down in price. Note: The number of consecutive months the commodity is listed is indicated after each item. OCTOBER 2026 MANUFACTURING INDEX SUMMARIES Manufacturing PMI® A Manufacturing PMI® above 47.5 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the October Manufacturing PMI® indicates the overall economy grew for the 24th straight month. "The past relationship between the Manufacturing PMI® and the overall economy indicates that October reading (55.5 percent) corresponds to a 2.7-percent increase in real gross domestic product (GDP) on an annualized basis," says Spence. THE LAST 12 MONTHS
New Orders The 11 manufacturing industries that reported growth in new orders in October, in order, are: Textile Mills; Electrical Equipment, Appliances & Components; Machinery; Primary Metals; Computer & Electronic Products; Miscellaneous Manufacturing; Plastics & Rubber Products; Transportation Equipment; Chemical Products; Fabricated Metal Products; and Paper Products. The four industries reporting a decline in new orders in October are: Printing & Related Support Activities; Nonmetallic Mineral Products; Food, Beverage & Tobacco Products; and Wood Products.
Production The 11 industries reporting growth in production during the month of October — listed in order — are: Primary Metals; Computer & Electronic Products; Plastics & Rubber Products; Textile Mills; Transportation Equipment; Machinery; Miscellaneous Manufacturing; Chemical Products; Paper Products; Fabricated Metal Products; and Nonmetallic Mineral Products. The three industries that reported a decrease in production in October are: Printing & Related Support Activities; Food, Beverage & Tobacco Products; and Wood Products.
Employment Of the 18 manufacturing industries, eight reported employment growth in October, in the following order: Plastics & Rubber Products; Wood Products; Machinery; Electrical Equipment, Appliances & Components; Primary Metals; Transportation Equipment; Computer & Electronic Products; and Food, Beverage & Tobacco Products. The five industries reporting a decrease in employment in October are: Printing & Related Support Activities; Nonmetallic Mineral Products; Paper Products; Miscellaneous Manufacturing; and Chemical Products.
Supplier Deliveries† The 12 manufacturing industries reporting slower supplier deliveries in October, in order, are: Electrical Equipment, Appliances & Components; Fabricated Metal Products; Computer & Electronic Products; Machinery; Nonmetallic Mineral Products; Furniture & Related Products; Primary Metals; Plastics & Rubber Products; Transportation Equipment; Chemical Products; Food, Beverage & Tobacco Products; and Miscellaneous Manufacturing. Two industries (Textile Mills; and Paper Products) reported that supplier deliveries were faster in October.
Inventories Of 18 manufacturing industries, the seven reporting higher inventories in October — in the following order — are: Printing & Related Support Activities; Plastics & Rubber Products; Textile Mills; Food, Beverage & Tobacco Products; Transportation Equipment; Electrical Equipment, Appliances & Components; and Machinery. The six industries reporting lower inventories in October — listed in order — are: Wood Products; Paper Products; Primary Metals; Fabricated Metal Products; Miscellaneous Manufacturing; and Chemical Products.
Customers' Inventories† No industry reported that customers' inventories were too high in October. The 11 industries reporting customers' inventories as too low in October, in order, are: Nonmetallic Mineral Products; Electrical Equipment, Appliances & Components; Primary Metals; Paper Products; Fabricated Metal Products; Chemical Products; Food, Beverage & Tobacco Products; Transportation Equipment; Machinery; Miscellaneous Manufacturing; and Computer & Electronic Products. Seven industries reported no change in customers' inventories in October compared to September.
Prices† In October, the 16 industries that reported paying increased prices for raw materials, in order, are: Furniture & Related Products; Printing & Related Support Activities; Fabricated Metal Products; Nonmetallic Mineral Products; Electrical Equipment, Appliances & Components; Machinery; Paper Products; Textile Mills; Wood Products; Miscellaneous Manufacturing; Computer & Electronic Products; Primary Metals; Chemical Products; Plastics & Rubber Products; Transportation Equipment; and Food, Beverage & Tobacco Products. No industries reported paying decreased prices for raw materials in October.
Backlog of Orders† The 11 industries reporting higher backlogs in October — listed in order — are: Textile Mills; Electrical Equipment, Appliances & Components; Plastics & Rubber Products; Fabricated Metal Products; Paper Products; Primary Metals; Machinery; Miscellaneous Manufacturing; Computer & Electronic Products; Food, Beverage & Tobacco Products; and Transportation Equipment. The three industries reporting lower backlogs in October are: Wood Products; Nonmetallic Mineral Products; and Chemical Products.
New Export Orders† Of the 18 manufacturing industries, the two that reported growth in new export orders in October are: Chemical Products; and Transportation Equipment. The nine industries that reported a decrease in new export orders in October — in the following order — are: Wood Products; Printing & Related Support Activities; Petroleum & Coal Products; Paper Products; Fabricated Metal Products; Food, Beverage & Tobacco Products; Electrical Equipment, Appliances & Components; Machinery; and Computer & Electronic Products. Seven industries reported no change in exports.
Imports† The seven industries reporting higher imports in October — listed in order — are: Plastics & Rubber Products; Miscellaneous Manufacturing; Primary Metals; Computer & Electronic Products; Transportation Equipment; Food, Beverage & Tobacco Products; and Machinery. The three industries that reported lower volumes in October are: Wood Products; Paper Products; and Fabricated Metal Products. Eight industries reported no change in imports in October compared to September.
†The Supplier Deliveries, Customers' Inventories, Prices, Backlog of Orders, New Export Orders, and Imports indexes do not meet the accepted criteria for seasonal adjustments. Buying Policy
About This Report The data presented herein is obtained from a survey of manufacturing supply executives based on information they have collected within their respective organizations. ISM® makes no representation, other than that stated within this release, regarding the individual company data collection procedures. The data should be compared to all other economic data sources when used in decision-making. Data and Method of Presentation Survey responses reflect the change, if any, in the current month compared to the previous month. For nine indicators (New Orders, Backlog of Orders, New Export Orders, Imports, Production, Supplier Deliveries, Inventories, Employment, and Prices), this report shows the percentage reporting each response, the net difference between the number of responses in the positive economic direction (higher, better and slower for Supplier Deliveries) and the negative economic direction (lower, worse and faster for Supplier Deliveries), and the diffusion index. For Customers' Inventories, respondents report their assessment of their customers' stock levels of respondent companies' products this month (rather than last month): too high, about right, and too low. Responses are raw data and are never changed. The diffusion index includes the percent of positive responses plus one-half of those responding the same (considered positive). The resulting single index number for those meeting the criteria for seasonal adjustments (Manufacturing PMI®, New Orders, Production, Employment and Inventories) is then seasonally adjusted to allow for the effects of repetitive intra-year variations resulting primarily from normal differences in weather conditions, various institutional arrangements, and differences attributable to non-moveable holidays. All seasonal adjustment factors are subject annually to relatively minor changes when conditions warrant them. The Manufacturing PMI® is a composite index based on the diffusion indexes of five of the indexes with equal weights: New Orders (seasonally adjusted), Production (seasonally adjusted), Employment (seasonally adjusted), Supplier Deliveries, and Inventories (seasonally adjusted). Diffusion indexes have the properties of leading indicators and are convenient summary measures showing the prevailing direction of change and the scope of change. A Manufacturing PMI® reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally declining. A Manufacturing PMI® above 47.5 percent, over a period of time, indicates that the overall economy, or gross domestic product (GDP), is generally expanding; below 47.5 percent, it is generally declining. The distance from 50 percent or 47.5 percent is indicative of the extent of the expansion or decline. With some of the indicators within this report, ISM® has indicated the departure point between expansion and decline of comparable government series, as determined by regression analysis. For the Customers' Inventories Index, numerically, a reading: above 50 percent is "too high," equal to 50 percent is "about right," and below 50 percent is "too low." However, in practice and in the context of other data, customers' inventories may be considered to be "about right" if the diffusion index is between 52 percent (the high side of about right) and 48 percent (the low side of about right). The ISM® Manufacturing PMI® Report survey is sent out to Manufacturing Business Survey Panel respondents the first part of each month. Respondents are asked to report on information for the current month for U.S. operations only. ISM® receives survey responses throughout most of any given month, with the majority of respondents generally waiting until late in the month to submit responses to give the most accurate picture of current business activity. ISM® then compiles the report for release on the first business day of the following month. The industries reporting growth, as indicated in the ISM® Manufacturing PMI® Report, are listed in the order of most growth to least growth. For the industries reporting contraction or decreases, those are listed in the order of the highest level of contraction/decrease to the least level of contraction/decrease. Responses to Buying Policy reflect the percent reporting the current month's lead time, the approximate weighted number of days ahead for which commitments are made for Capital Expenditures; Production Materials; and Maintenance, Repair and Operating (MRO) Supplies, expressed as hand-to-mouth (five days), 30 days, 60 days, 90 days, six months (180 days), a year or more (360 days), and the weighted average number of days. These responses are raw data, never revised, and not seasonally adjusted. ISM PMI® Content The Institute for Supply Management® ("ISM®") PMI® Reports, formerly Report On Business®, (Manufacturing and Services reports) ("ISM PMI®") contain information, text, files, images, video, sounds, musical works, works of authorship, applications, and any other materials or content (collectively, "Content") of ISM ("ISM PMI® Content"). ISM PMI® Content is protected by copyright, trademark, trade secret, and other laws, and as between you and ISM, ISM owns and retains all rights in the ISM PMI® Content. ISM hereby grants you a limited, revocable, nonsublicensable license to access and display on your individual device the ISM PMI® Content (excluding any software code) solely for your personal, non-commercial use. The ISM PMI® Content shall also contain Content of users and other ISM licensors. Except as provided herein or as explicitly allowed in writing by ISM, you shall not copy, download, stream, capture, reproduce, duplicate, archive, upload, modify, translate, publish, broadcast, transmit, retransmit, distribute, perform, display, sell, or otherwise use any ISM PMI® Content. Except as explicitly and expressly permitted by ISM, you are strictly prohibited from creating works or materials (including but not limited to tables, charts, data streams, time-series variables, fonts, icons, link buttons, wallpaper, desktop themes, online postcards, montages, mashups and similar videos, greeting cards, and unlicensed merchandise) that derive from or are based on the ISM PMI® Content. This prohibition applies regardless of whether the derivative works or materials are sold, bartered, or given away. You shall not either directly or through the use of any device, software, internet site, web-based service, or other means remove, alter, bypass, avoid, interfere with, or circumvent any copyright, trademark, or other proprietary notices marked on the Content or any digital rights management mechanism, device, or other content protection or access control measure associated with the Content including geo-filtering mechanisms. Without prior written authorization from ISM, you shall not build a business utilizing the Content, whether or not for profit. You shall not create, recreate, distribute, incorporate in other work, or advertise an index of any portion of the Content unless you receive prior written authorization from ISM. Requests for permission to reproduce or distribute ISM PMI® Content can be made by contacting in writing at: ISM Research, Institute for Supply Management, 350 W. Washington St., Suite 301, Tempe, AZ 85288, or by emailing [email protected]. Subject: Content Request. ISM shall not have any liability, duty, or obligation for or relating to the ISM PMI® Content or other information contained herein, any errors, inaccuracies, omissions or delays in providing any ISM PMI® Content or for any actions taken in reliance thereon. In no event shall ISM be liable for any special, incidental, or consequential damages arising out of the use of the ISM PMI®. Report On Business®, PMI®, Manufacturing PMI® and Services PMI® are registered trademarks of Institute for Supply Management®. Institute for Supply Management® and ISM® are registered trademarks of Institute for Supply Management, Inc. About Institute for Supply Management® (ISM®) ISM is the world's first professional association for supply chain — founded in 1915, before the term 'supply chain' was widely used. We didn't enter this profession. We helped shape it. Today, we're a community of over 200,000 professionals in more than 100 countries — early-career practitioners building credentials, experienced leaders seeking strategic insight, and organizations developing their procurement teams that drive their business forward. What connects us is a shared belief that supply chain is strategic work that deserves world-class support. For more information, please visit: www.ismworld.org. The full text version of the ISM® Manufacturing PMI® Report is posted on ISM®'s website at www.ismrob.org on the first business day* of every month after 10:00 a.m. ET. The one exception is in January when the report is released on the second business day of the month. The next ISM® Manufacturing PMI® Report featuring November 2026 data will be released at 10:00 a.m. ET on Tuesday, December 1, 2026. *Unless the New York Stock Exchange is closed.
SOURCE Institute for Supply Management
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
