TMCnet - World's Largest Communications and Technology Community



Texas Instruments to Sample Smart Meter System on Chip
[October 12, 2012]

Texas Instruments to Sample Smart Meter System on Chip

Oct 12, 2012 (Close-Up Media via COMTEX) -- Texas Instruments announced it is now sampling a fully integrated and optimized Smart Meter System on Chip for smart electrical meter designs.

According to a release, the new Smart Meter SoC combines three independent engines. The metrology engine delivers 0.5 percent meter class accuracy and includes support for one-phase or three-phase meters. The ARM Cortex-M3 core allows ease of development for meter management firmware (DLMS/COSEM, advanced metrology, application profiles, network stack) and security with memory up to 1MB Flash. A communication engine includes support of multiple standards for power line communication and radio frequency communications to allow developers to design products capable of communicating with wide area network and home area network domains and enabled devices.

Features and benefits of TI's Smart Meter SoC: -Certified metrology code is fully independent from the application code, allowing developers to make easy software upgrades and maintenance.

-Communications engine has sufficient memory for field upgrades, which reduces system costs by eliminating the need for external memory.

-Supports TI's plcSUITE software for all narrowband PLC standards including G1, G3, PRIME, IEEE P1901.2, ITU G.9903 and G.9904: a single platform for global markets reduces meter development cost and speeds time to market.

-Includes multiple communication interfaces to easily connect external components like TI's RF transceivers to bridge WAN and HAN on one single chip (sub-1GHz or 2.4GHz).

-Encryption table and memory protection enable developers to include a security implementation on their smart e-meter products.

-Expandable platform to support future smart e-meter features sets because of external memory interface.

-Flexible clock scheme on separate engines allows adaption of processing power and power consumption to application requirements.

-Plugs into TI's new Smart Meter Board 3.0 to support advanced features and near field communication, sub-1GHz, ZigBee and Wi-Fi connectivity options.

-Supports the following TI smart grid software: metrology libraries or metroSUITE compliant with EN 50470-1/3, IEC62053-21/22/23, ANSIC12.1/10/20 for one-phase and three-phase meters; plcSUITE; RF communication in sub-1GHz bands (including 802.15.4g); ZigBee Smart Energy Profile 1.x and SEP2.0 running on the Cortex-M3 core; prepayment MIFARE, NFC and encryption for design ease and flexibility The Smart Meter SoC is available for sampling.

Texas Instruments is a provider of semiconductors.

((Comments on this story may be sent to

[ Back To's Homepage ]

Technology Marketing Corporation

35 Nutmeg Drive Suite 340, Trumbull, Connecticut 06611 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments:
Comments about this site:


© 2018 Technology Marketing Corporation. All rights reserved | Privacy Policy