The SmartMetric Biometric Credit Card Provides 100% Validation of the Card User Before the Card is Used
SmartMetric, Inc. (OTCQB: SMME): Unlike standard credit and debit cards that rely on the questionable safety of PIN numbers and CVV codes for user validation, the SmartMetric biometric credit card solution provides 100% card user validation immediately before the card is inserted into a credit card retail reader or ATM.
In other words, the credit or debit card chip and/or the card's internal RFID used for NFC contactless payments will not work without first the card user's fingerprint being successfully matched against their fingerprint that is already stored inside the card.
At no time does the user's fingerprint leave the safety of the card. The SmartMetric biometric card does not store the user's fingerprint on a centralized computer. Rather, the user's fingerprint is safely stored inside the SmartMetric card protected behind a highly encrypted firewall.
When a card holder first receives their card it is a simple process for them to store their fingerprint inside the card. Much the same as when a person receives a smartphone and they touch the screen of the phone 3 or 4 times to have their fingerprint registered and stored inside the phone, so too with the SmartMetric biometric card. All the card holder needs to do is touch the card's fingerprint sensor 3 to 4 times and the user's fingerprint will be permanently stored inside the credit or debit card.
The ease of use and in particular the ease of storing a first time card user's fingerprint is highly important in credit card markets such as the United States. The largest credit card issuing Banks in the USA distribute their credit cards to new card holders via the mail. One method of inserting the card user's fingerprint into a card is to have them come into a bank branch and use a specialized fingerprint reader that copies the person's fingerprint and then stores it inside the new card. For most large scale credit card issuers this is not efficient and in the case of some not even possible given their limited branch footprint.
"Having a simple and yet highly secure method for a card user to first install their fingerprint inside of the card, that would also work with existing large scale credit card issuers, was of the utmost importance to the electronic design team at SmartMetric," said SmartMetric President and CEO, Chaya Hendrick.
Simple and frictionless
After the card holder's fingerprint is stored inside the card, all the card user needs to do is touch the fingerprint sensor on the surface. In less time than it takes to reach across to insert the card into a credit or debit card reader, the card has scanned the user's fingerprint and matched it with the pre-stored fingerprint inside the card. On a successful fingerprint match, the cards is turned on so that it can perform a card transaction.
The ease of use of the SmartMetric biometric card, along with the fact that it is powered by the SmartMetric internal green battery prior to the card being inserted into a reader to power the internal processor doing the fingerprint scan, means the SmartMetric biometric card is the only card that can work across all card reader types and situations. Biometric cards that do not have an internal independent power supply are very limited on where such cards can be used.
A big advantage for both credit card users as well as banks in fighting card fraud is the fact that the SmartMetric biometric card can not be activated if someone else is trying to use the card.
"Chip and RFID/NFC are activated for use only after a fingerprint match on the card bringing very strong biometric security for the next generation of credit cards," said SmartMetric's President and CEO, Chaya Hendrick.
SmartMetric's Biometric card addresses the multibillion existing chip-based credit and debit card market. Figures published by EMVCo1 reveal that by year end of 2020, 10.8 billion EMV® chip cards have been issued by financial institutions and were in global circulation - a massive increase of nearly 1 billion credit and debit EMV® cards compared to the previous twelve months.
EMV is a registered trademark of EMVCo.
Safe Harbor Statement: Forward-Looking Statements in this press release, which are not historical facts, are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Also such forward-looking statements are within the meaning of that term in Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Our actual results, performance or achievements may differ materially from those expressed or implied by these forward-looking statements. In some cases, you can identify forward-looking statements by the use of words such as "may," "could," "expect," "intend," "plan," "seek," "anticipate," "believe," "estimate," "predict," "potential," "continue," "likely," "will," "would" and variations of these terms and similar expressions, or the negative of these terms or similar expressions. Such forward-looking statements are necessarily based upon estimates and assumptions that, while considered reasonable by us and our management, are inherently uncertain. Factors that may cause actual results to differ materially from current expectations include, among others, if we are unable to access the capital necessary to fund current operations or implement our plans for growth; changes in the competitive environment in our industry and the markets where we operate; our ability to access the capital markets; and other risks discussed in the Company's filings with the U.S. Securities and Exchange Commission, including our Annual Report on Form 10-K, which filings are available from the SEC. We caution you not to place undue reliance on any forward-looking statements, which are made as of the date of this press release. We undertake no obligation to update publicly any of these forward-looking statements to reflect actual results, new information or future events, changes in assumptions or changes in other factors affecting forward-looking statements, except to the extent required by applicable laws. If we update one or more forward-looking statements, no inference should be drawn that we will make additional updates with respect to those or other forward-looking statements. Investors and security holders are urged to carefully review and consider each of SmartMetric Inc. public filings with the SEC, including but not limited to, if applicable, Annual Reports on Form 10-K, proxy statements, Current Reports on Form 8-K and Quarterly Reports on Form 10-Q.