SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

Achronix Announces Immediate Availability of Speedcore Gen4 eFPGA IP for AI/ML and Networking Hardware Acceleration Applications
[December 04, 2018]

Achronix Announces Immediate Availability of Speedcore Gen4 eFPGA IP for AI/ML and Networking Hardware Acceleration Applications


SANTA CLARA, Calif., Dec. 4, 2018 /PRNewswire/ -- Achronix Semiconductor Corporation, a leader in FPGA-based hardware accelerator devices and high-performance eFPGA IP, today announced immediate availability of its Speedcore™ Gen4 embedded FPGA (eFPGA) IP for integration into users' SoCs. Speedcore Gen4 increases performance 60%, reduces power by 50% and die area by 65% while retaining the original Speedcore eFPGA IP's abilities to bring programmable hardware-acceleration capabilities to a broad range of compute, networking and storage systems for interface protocol bridging/switching, algorithmic acceleration and packet processing applications.

Achronix (PRNewsfoto/Achronix)

With the Speedcore Gen4 architecture, Achronix adds the new Machine Learning Processor (MLP) to the library of available blocks and delivers 300% higher system performance for artificial intelligence and machine learning (AI/ML) applications. MLP blocks are highly flexible, compute engines tightly coupled with embedded memories to give the highest performance per watt and lowest cost solution for AI/ML applications.

"Achronix Speedcore eFPGA with Gen4 architecture provides an optimal balance of hardware acceleration previously found only in ASIC implementations," said Robert Blake, president and CEO of Achronix Semiconductor. "Our new architecture adds the flexibility and reprogrammability of our proven FPGA technology to support exploding demand for new AI/ML and high data bandwidth applications."  

The dramatic increase in fixed and wireless network bandwidth, coupled with the redistribution of processing, and the emergence of billions of IoT devices will stress traditional network and compute infrastructure. Classic Cloud and Enterprise Data Center computing resources and communications infrastructure can no longer keep pace with exponential growth in data rates, the rapidly changing security protocols, or the many new networking and connectivity requirements. Traditional multicore CPUs and SoCs cannot meet these requirements unaided. They need hardware accelerators, often reprogrammable to pre-process and offload computations to increase the systems' overall compute performance.

Speedcore Gen4 is the Optimal AI/ML Accelerator
In addition to the general requirements of compute and networking infrastructure, AI/ML demands a significant increase in high-density, targeted computing. The new Achronix MLP exploits the specific attributes of AI/ML processing and increases performance for these applications by 300% compared to previous Achronix FPGA products. This is done through multiple architectural innovations that increase operating performance and the number of operations per clock cycle.

The MLP is a complete AI/ML compute engine. Each MLP includes a local yclical register file that leverages temporal locality for optimal reuse of stored weights or data. The MLPs are tightly coupled with neighboring MLP blocks and larger embedded memory blocks to deliver the highest processing performance, the highest operations per second and the lowest power profile. The MLPs support multiple precision fixed point and floating point formats including Bfloat16, 16-bit, half-precision floating point, 24-bit floating point and block floating point (BFP). Users can select the optimal precision for their application for performance, power and area.



To complement the MLP and increase the AI/ML compute density, Speedcore Gen4 look-up-tables (LUTs) can implement multipliers that are 2x more efficient than any industry standalone or embedded FPGA products. Leading FPGAs implement 6x6 multipliers in 21 LUTs whereas Speedcore Gen4 implements 6x6 multipliers in 11 LUTs and can operate at 1 GHz.

"The AI/ML wave continues to gain momentum with more IP geared toward AI applications. Achronix's announcement about its new IP architecture is encouraging and offers substantial improvements in performance, power and area: all issues that are important to silicon designers," said Rich Wawrzyniak, senior analyst, ASIC Services. "The introduction of eFPGA IP aimed at AI/ML applications that can be cost effective in both Cloud servers for training and in end-point devices for inference applications reinforces the view that AI functionality will become a 'check-list' item in most silicon solutions going forward."


Architectural Innovations Increase System Performance
The new Speedcore Gen4 architecture has many architectural innovations that increase overall operating performance by 60% compared to the previous generation of Speedcore products. All aspects of the LUTs have been enhanced to increase area efficiency and reduce resource usage which reduces power and die size and increases performance. Changes include doubling the size of the ALUs, doubling the registers per LUT, support for 7-bit functions and some 8-bit functions in a single level-of-logic delay, and dedicated high-speed connections for shift registers.

The routing architecture also has been enhanced with an independent and dedicated bus routing structure that includes dynamically selectable bus muxing that effectively create a distributed, run-time-configurable switching network. This is the first time that run-time logic functionality is available in the routing structure and it provides an optimal solution for high-bandwidth and low-latency applications.

How to Evaluate Speedcore Gen4
Achronix's ACE design tools include pre-configured, Speedcore Gen4 eFPGA example instances users can use to evaluate Speedcore Gen4 quality of results for performance, resource usage, and compile times. The ACE design tools with support for Speedcore Gen4 are available today.

Speedcore is a modular architecture easily sized to users' requirements. Achronix uses its Speedcore Builder tool to instantly create new Speedcore instances to match user requirements for quick evaluation. Users interested in receiving die size and power information can contact Achronix for details on their specific Speedcore Gen4 eFPGA size and process requirements.

Availability
Achronix is using its proven methodology to deliver Speedcore Gen4 eFPGA technology to users who want to combine the benefits and flexibility of eFPGA IP with enhanced AI/ML capabilities. Speedcore Gen4 IP is available for licensing on the most advanced FinFET processes today. Contact Achronix for details about supported process technologies.

About Achronix Semiconductor Corporation
Achronix is a privately held, fabless semiconductor corporation based in Santa Clara, California. The Company developed its FPGA technology, which is the basis of the Speedster22i FPGAs and Speedcore eFPGA technology. All Achronix FPGA products are supported by its ACE design tools that include integrated support for Synopsys Synplify Pro. The company has sales offices and representatives in the United States, Europe, and China, and has a research and design office in Bangalore, India.

Find out more at https://www.achronix.com.

Achronix and Speedster are registered trademarks and Speedcore and Speedchip are trademarks of Achronix Semiconductor Corporation.

All other brands, product names and marks are the property of their respective owners.

Contacts:
Steve Mensor                                                                 Nanette Collins
Achronix Semiconductor Corporation                            Nanette V. Collins Marketing and PR
408-889-4144                                                                 617-437-1822
steve.mensor@achronix.com                                         nanette@nvc.com

 

Cision View original content to download multimedia:http://www.prnewswire.com/news-releases/achronix-announces-immediate-availability-of-speedcore-gen4-efpga-ip-for-aiml-and-networking-hardware-acceleration-applications-300759692.html

SOURCE Achronix


[ Back To TMCnet.com's Homepage ]







Technology Marketing Corporation

35 Nutmeg Drive Suite 340, Trumbull, Connecticut 06611 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2018 Technology Marketing Corporation. All rights reserved | Privacy Policy