TMCnet News
Amtech Reports Fourth Quarter and Fiscal 2018 ResultsTEMPE, Ariz., Nov. 29, 2018 /PRNewswire/ -- Amtech Systems, Inc. (NASDAQ: ASYS), a manufacturer of capital equipment, including thermal processing and wafer handling automation, and related consumables used in fabricating semiconductor devices, light-emitting diodes, or LEDs, silicon carbide (SiC) and silicon power chips and solar cells, today reported results for its fourth quarter and year ended September 30, 2018. Fourth Quarter Fiscal 2018 Financial and Operational Highlights:
Fiscal Year 2018 Financial and Operational Highlights:
Mr. J.S. Whang, Executive Chairman of Amtech, commented, "In fiscal year 2018, we realized progress in all of our businesses, closing the year with record net revenues in our combined semiconductor and LED/SiC businesses. In solar, we successfully installed Phase I of our large turnkey project and announced orders this quarter of more than $11 million for our N-type systems." Mr. Whang continued, "We continue to develop our core technologies to ensure we are best positioned to be the supplier of choice in the marketplace. We look forward to continuing to prudently invest in the long-term profitable growth of the Company. And, in combination with that ongoing investment, we are pleased to report that in the fourth quarter we bought back over 771,000 shares of our common stock, completing our $4 million stock repurchase plan. In November 2018, the Board of Directors approved an additional $4 million stock repurchase plan." Net revenue for the fourth quarter of fiscal 2018 was $28.8 million compared to $41.2 million in the preceding quarter and $54.7 million in the fourth quarter of fiscal 2017. The sequential decrease is primarily due to decreased shipments of our solar and semiconductor equipment. Compared to the prior year quarter, net revenue decreased due primarily to lower shipments of solar equipment for the turnkey project. Our semiconductor shipments are experiencing quarter-to-quarter variability based on the timing of orders and the delivery schedules established by one of our customers. Unrestricted cash and cash equivalents at September 30, 2018 were $58.3 million, compared to $51.1 million at September 30, 2017. Pursuant to our previously announced stock repurchase program, during the quarter ended September 30, 2018, we completed our $4.0 million stock repurchase plan and repurchased 771,149 shares of our common stock. All shares repurchased were retired. On November 27, 2018 the Board of Directors of Amtech Systems, Inc. (the "Company") approved a stock repurchase program, pursuant to which the Company may repurchase up to $4 million of its outstanding common stock, par value $0.01 per share, over a one-year period. At September 30, 2018, our total order backlog was $51.1 million (Semi and LED/SiC* segments $23.7 million, Solar segment $27.4 million), compared to total backlog of $41.2 million (Semi and LED/SiC* segments $22.3 million, Solar segment $19.0 million) at June 30, 2018. Backlog includes deferred revenue and customer orders that are expected to ship within the next 12 months. Gross margin in the fourth quarter of fiscal 2018 was 29%, compared to 35% in the preceding quarter and 36% in the fourth quarter of fiscal 2017. Sequentially and compared to the prior year, gross margin decreased primarily due to lower volumes and factory utilization, and less recognition of previously deferred profit. Selling, general and administrative expense ("SG&A") in the fourth quarter of fiscal 2018 was $7.9 million, compared to $9.5 million in the preceding quarter and $9.8 million in the fourth quarter of fiscal 2017. Sequentially and compared to prior year, SG&A decreased primarily due to lower commissions and freight resulting from lower shipments. Lower employee-related expenses in the fourth quarter of fiscal 2018 also contributed to the decrease in SG&A compared to prior year. As previously announced, due to the ongoing challenges we are experiencing in our Solar segment, we implemented a restructuring plan ("the Plan") during the fourth quarter of fiscal 2018. Once fully implemented, we expect the Plan to reduce operating costs by approximately $3 million on an annualized basis. It is expected that the effect of these reductions will not be fully realized until our third quarter of fiscal 2019. The Plan is to better align our workforce with the current needs of our business and enhance our competitive position for long-term success. Under the Plan, we reduced our Solar workforce by approximately 35-40 employees. We recorded approximately $0.9 million of related costs in the fourth quarter of fiscal 2018. We conducted our periodic assessment of long-lived assets in the fourth quarter of fiscal 2018. The assessment resulted in a determination that the goodwill and intangible assets of the Solar segment were impaired in the amounts of $5.7 million and $1.3 million, respectively, due primarily to the decline in the expected performance of that segment. We will continue to evaluate opportunities to improve our operational efficiencies and effectiveness, including greater China sourcing, in order to improve the competitive position for our Solar segment while pursuing continued technological advancements. Research, development and engineering (RD&E) expense was $1.5 million in the fourth quarter of fiscal 2018 compared to $2.1 million in the preceding quarter and $1.8 million in the fourth quarter of fiscal 2017. Income tax in the fourth quarter of fiscal 2018 was an expense of $0.4 million compared to $1.4 million in the preceding quarter and $0.5 million in the fourth quarter of fiscal 2017. Net loss for the fourth quarter of fiscal 2018 was $9.0 million, or $0.61 per diluted share, compared to net income of $7.3 million, or $0.51 per diluted share for the fourth quarter of fiscal 2017 and net income of $5.0 million or $0.33 per diluted share in the preceding quarter. The net loss in the fourth quarter of fiscal 2018 was primarily due to the $7.0 million non-cash impairment in the Solar segment. *Note: LED/SiC (silicon carbide) refers to our Polishing segment. Combined Semi and LED/SiC refers to the sum of our Semiconductor and LED/SiC segments. Solar refers to our Solar segment, which includes products sold for semiconductor applications of no more than 25% of the segment's totals. The Combined Semi and LED/SiC amounts above are non-GAAP measures, as they are a subtotal of two separate segments. These non-GAAP financial measures are not prepared in accordance with GAAP and may be different from non-GAAP financial measures presented by other companies. Non-GAAP financial measures should not be considered as a substitute for, or superior to, measures of financial performance prepared in accordance with GAAP. A tabular reconciliation of financial measures prepared in accordance with GAAP to the non-GAAP financial measures is included in the Summary Financial Information table in this press release. Outlook The Company expects revenues for the quarter ending December 31, 2018 to be in the range of $27 to $29 million. Gross margin for the quarter ending December 31, 2018 is expected to be in the mid to upper 20 percent range, with operating margin negative. The solar and semiconductor equipment industries can be cyclical and inherently impacted by changes in market demand. Additionally, operating results can be significantly impacted, positively or negatively, by the timing of orders, system shipments, and the net impact of revenue deferral on shipments, recognition of revenue based on customer acceptances and the financial results of solar and semiconductor manufacturers. The results for the coming quarters could be significantly influenced by the timing of future orders of the 1GW turnkey project and the timing of meeting start-up milestones of the turnkey production lines. A substantial portion of Amtech's revenues are denominated in Euros. The revenue outlook provided in this press release is based on an assumed exchange rate between the United States Dollar and the Euro. A significant decrease in the value of the Euro in relation to the United States Dollar could cause actual revenues to be lower than anticipated. Conference Call Amtech Systems will host a conference call and webcast today at 5:00 p.m. ET to discuss fourth quarter and fiscal 2018 financial results. Those in the USA wishing to participate in the live call should dial (844) 868-9329. From Canada, dial (866) 605-3852, and internationally, dial (412) 317-6703. Request "Amtech" when connected to the operator. A replay of the call will be available one hour after the end of the conference call through December 7, 2018. To access the replay please dial US toll free (877) 344-7529 and enter code 10125841. Internationally, dial (412) 317-0088 and use the same code. A live and archived web cast of the conference call can be accessed in the investor relations section of Amtech's website at www.amtechsystems.com. About Amtech Systems, Inc. Amtech Systems, Inc. is a global supplier of advanced thermal processing and polishing equipment and related consumables to the semiconductor / electronics, power IC businesses, solar, and advanced lighting manufacturing markets. Amtech's equipment includes diffusion, solder reflow systems. wafer handling automation, ALD and PECVD systems and polishing equipment and related consumables for surface preparation of various materials, including silicon carbide ("SiC"), sapphire and silicon. The Company's wafer handling, thermal processing, polishing and consumable products currently address the diffusion, oxidation, and deposition steps used in the fabrication of semiconductors, printed circuit boards, semiconductor packaging, solar cells, MEMS, and advanced lighting, including the polishing of newly sliced sapphire and silicon wafers. Amtech's products are recognized under the leading brand names BTU International, Bruce TechnologiesTM, PR HoffmanTM, Tempress SystemsTM, R2D AutomationTM and SoLayTec. Cautionary Note Regarding Forward-Looking Statements Certain information contained in this press release is forward-looking in nature. All statements in this press release, or made by management of Amtech Systems, Inc. and its subsidiaries ("Amtech"), other than statements of historical fact, are hereby identified as "forward-looking statements" (as such term is defined in Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended). The forward-looking statements in this press release relate only to events or information as of the date on which the statements are made in this press release. Examples of forward-looking statements include statements regarding Amtech's future financial results, operating results, business strategies, projected costs, products under development, competitive positions, plans and objectives of Amtech and its management for future operations, efforts to improve operational efficiencies and effectiveness and greater China sourcing. In some cases, forward-looking statements can be identified by terminology such as "may," "will," "should," "would," "expects," "plans," "anticipates," "intends," "believes," "estimates," "predicts," "potential," "continue," or the negative of these terms or other comparable terminology used in this press release or by our management are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. The Form 10-K, as amended, that Amtech filed with the Securities and Exchange Commission (the "SEC") for the year-ended September 30, 2017, listed various important factors that could affect the company's future operating results and financial condition and could cause actual results to differ materially from historical results and expectations based on forward-looking statements made in this document or elsewhere by Amtech or on its behalf. These factors can be found under the heading "Risk Factors" in the Form 10-K and investors should refer to them. Because it is not possible to predict or identify all such factors, any such list cannot be considered a complete set of all potential risks or uncertainties. Except as required by law, we undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events, or otherwise. Contacts:
View original content:http://www.prnewswire.com/news-releases/amtech-reports-fourth-quarter-and-fiscal-2018-results-300757909.html SOURCE Amtech Systems, Inc. |