SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

QSFP-DD MSA to release QSFP-DD Thermal White Paper During OFC 2018
[March 13, 2018]

QSFP-DD MSA to release QSFP-DD Thermal White Paper During OFC 2018


Molex, Cisco, Juniper Networks (News - Alert) and other Multi Source Agreement (MSA) group members will release a white paper focused on the Quad Form Factor Pluggable Double Density (QSFP-DD) during the Optical Networking and Communication Conference and Exhibition (OFC 2018), March 11-15, 2018 at the San Diego (CA (News - Alert)) Convention Center.

In total, 62 companies have come together in support of the QSFP-DD MSA to address the industry need for a high-density, high-speed networking solution. Established two years ago, the QSFP-DD MSA group accepted the challenge to meet the market demand for a next generation high-density, high-speed pluggable backwards compatible module form factor and has succeeded in releasing a 3.0 Hardware specification with broad market support that overcomes the technical challenges of specifying a QSFP28 compatible double-density interface.

The white paper addresses how the thermal performance of the QSFP-DD module is evaluated for use in a high-performance data center environment. Thermal test data is presented and analyzed showing temperature rise versus air flow. Feasibility of 15W QDFP-DD modules is shown.

"Building an sustaining the pipeline of interoperable interconnect solutions is absolutely critical to support advances in transceiver modules, switch technologies and servers," said Scott Sommers, group product manager, Molex (News - Alert). "Through QSFP-DD strategic collaborations, we have provided the expertise needed within the industry to meet the rising demands for high-speed network solutions."



"Cisco (News - Alert) has always had confidence in QSFP-DD being the right choice for broad industry adoption as the market moves to 400GbE. This whitepaper shows that any concerns with a system vendor's ability to effectively integrate and cool these modules into their networking products is overblown," said Mark Nowell, distinguished engineer, Cisco Data Center Switching.

"The QSFP-DD form factor with system cooling support of 15W of dissipated power for data center applications is direct leverage of industry knowledge gained over many generations of adoption of form factor such as those defined by the SFF Committee and the CFP MSA along with innovation in system air-flow characteristics. Thermal management is seen primarily as a system responsibility, which leaves open opportunity for even further innovation over system generation," said Jeffery Maki, distinguished engineer II, Juniper Networks.


For more information on the QSFP-DD module thermal management system white paper, please visit www.qsfp-dd.com.


[ Back To TMCnet.com's Homepage ]







Technology Marketing Corporation

35 Nutmeg Drive Suite 340, Trumbull, Connecticut 06611 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2018 Technology Marketing Corporation. All rights reserved | Privacy Policy