SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

Virtium Expands StorFly Industrial SSD Family With New NVMe 3D NAND-Based M.2 Drives Featuring I-Temp Support
[June 26, 2019]

Virtium Expands StorFly Industrial SSD Family With New NVMe 3D NAND-Based M.2 Drives Featuring I-Temp Support


Virtium, a leading provider of industrial solid-state drive (SSD) and memory solutions for the Industrial Internet of Things (IIoT) market, today announced an expansion of its StorFly® family of industrial SSDs. The new line of StorFly drives combine the high-performance NVMe protocol and M.2 form factor with the cost efficiencies of 3D NAND flash and industrial-temperature (I-Temp) support that enables drive endurance in environments ranging from -40Cº to 85Cº.

With industry-standard capacities ranging from 60GB to 2TB and support for AES-256 encryption, the new StorFly SSDs enable a wider range of industrial-grade solid-state storage for IIoT, machine-to-machine (M2M) and other embedded designs. They take advantage of the powerful NVMe protocol; M.2's small footprint, which conserves space and power; and multi-level-cell 3D NAND that yields higher densities at a lower cost per bit.

"The StorFly family of SSDs continues to evolve, providing the endurance, reliability and efficiencies designers require for their IIoT, M2M and industrial-embedded designs," said Scott Phillips, Virtium vice president of marketing. "Blending 3D NAND, NVMe and I-Temp support into the family adds a new dimension of industrial-design readiness of StorFly drives."

StorFly SSDs use only 3D NAND flash that can withstand the harsh enviroments in which Virtium drives are often deployed. With I-Temp support, the 3D NAND-based SSDs not only expand storage capacity in the same space as 2D NAND drives but they're ensured of tolerating and operating reliably in extreme temperatures typical of IIoT, M2M and industrial-embedded systems.



StorFly's M.2 form factors allow the drives to be deployed in space-constrained systems while drawing minimal power. Compliant with the NVMe 1.3 and PCI (News - Alert) Express 3.1 specifications, these new Virtium SSDs not only deliver high-speed data transfer but will auto-configure to support x1, x2 and x4 lanes, depending on the host system requirements.

As with all industrial SSDs in the StorFly family, these newly introduced drives include vtGuard®, vtSecure™, vtView® and vtTools™ -- Virtium's value-add software for data protection and solid-state storage monitoring, along with simplified qualification to help accelerate product certification. These software modules provide users the ability to optimize, protect, manage and qualify Virtium SSDs.


For more information on the new StorFly NVMe M.2 3D NAND-based industrial SSDs with I-Temp support, as well as Virtium's broad portfolio of solid-state storage and memory solutions, visit www.virtium.com, call 888.847.8486 or email sales@virtium.com.

About Virtium

Virtium is a leading supplier of industrial-grade solid-state storage and memory solutions for the world's top OEMs. For more than two decades, the company has designed and built its SSDs and other products in the USA, fortified by a global network of sales and support locations. Virtium's world-class technology and unsurpassed customer support result in superior industrial embedded solutions for our interconnected world.

StorFly, vtGuard and vtView are registered trademarks, and vtSecure and vtTools are trademarks of Virtium LLC.


[ Back To TMCnet.com's Homepage ]









Technology Marketing Corporation

35 Nutmeg Drive Suite 340, Trumbull, Connecticut 06611 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2019 Technology Marketing Corporation. All rights reserved | Privacy Policy