SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

pSemi Showcases 5G mmWave Portfolio at IMS 2018 and Introduces World's First 50 GHz Digital Step Attenuator (DSA)
[June 12, 2018]

pSemi Showcases 5G mmWave Portfolio at IMS 2018 and Introduces World's First 50 GHz Digital Step Attenuator (DSA)


PHILADELPHIA, June 12, 2018 /PRNewswire/ -- INTERNATIONAL MICROWAVE SYMPOSIUM (IMS) – pSemiTM Corporation (formerly Peregrine Semiconductor), a Murata company focused on semiconductor integration, will showcase its 5G millimeter (mmWave) products at IMS booth #1349. These 5G mmWave parts include a 40 GHz switch, two 60 GHz switches and, now, a 50 GHz DSA. This mmWave DSA is the world's first single-chip digital step attenuator (DSA) to support the entire 9 kHz to 50 GHz frequency range. The pSemi mmWave products deliver excellent performance across a wide frequency range.

"For the last several years, our product portfolio has continuously expanded into higher frequencies," says Jim Cable, CTO at pSemi. "Today, pSemi is introducing a true marvel in mmWave design—the world's first 50 GHz DSA. Ideal for 5G test and measurement applications, this 50 GHz DSA further extends our product portfolio into mmWave frequencies and applications. Our mmWave solutions are proof that RF silicon on insulator (SOI) can deliver a high-performing and reliable solution at these high frequencies."

The World's First Single-Chip 50 GHz DSA
The PE43508 is a 6-bit, 50-ohm DSA that offers wideband support from 9 kHz to 50 GHz. The PE43508 covers a 31.5 dB attenuation range in 0.5 dB and 1 dB steps, and it is capable of maintaining 0.5 dB and 1 dB monotonicity through 50 GHz. This high-performance DSA features low insertion loss, fast switching time and low attenuation error. The PE43508 also delivers glitch-safe attenuation state transitions, which eliminates the positive glitch.

Offered as a flip-chip, monolithic die, the PE43508 is easy to use and ideal for mmWave applications including 5G test and measurement, 5G wireless infrastructure, point-to-point communication systems and very small aperture terminals (VSAT). Samples are available now. For 1K-quantity orders, each PE43508 is $50 USD.






PE43508

Type

6-bit, 50-ohm

Operating Frequency

9 kHz to 50 GHz

Attenuation Range

0 dB to 31.5 dB

Attenuation Error

+1.5/-1.0 dB typ. (26.5-50.0 GHz, 0-15.5 dB range)

+3.0/-1.0 dB typ. (26.5-50.0 GHz, 16.0-31.5 dB range)

Insertion Loss

3.5 dB typ. (13.0-26.5 GHz)

5.5 dB typ. (45.0-50.0 GHz)

Output Return loss

14 dB typ.  (13.0-26.5 GHz)

11 dB typ. (26.5-50 GHz)

Switching Time

350 ns typ.

Temperature Range

-40 to +105 °C

Programming Modes

Direct parallel

Latched parallel

Serial addressable

Package

Flip-chip die


Additional pSemi 5G mmWave Solutions
The 50 GHz DSA (PE43508) joins the UltraCMOS® 40 GHz switch (PE42524)  and two 60 GHz switches (PE42525, PE426525) in delivering high performance at mmWave frequencies.

  • The PE42524 was the industry's first RF SOI switch to operate up to 40 GHz. When it was introduced in 2015, it offered design engineers their first alternative to gallium-arsenide (GaAs) switches in the K-and Ka-bands. This wideband flip-chip switch delivers high isolation performance, excellent linearity and low insertion loss.
  • Supporting a wide frequency range from 9 kHz to 60 GHz, the PE42525 and PE426525 deliver exceptional performance in all key RF parameters and have a fast switching speed of only 8 nanoseconds. The PE42525 is ideal for test-and-measurement equipment, microwave-backhaul solutions and higher frequency switching in 5G systems. The PE426525 boasts an extended temperature range that extends from -55 to +125 degrees Celsius.

PE42524

PE42525

PE426525

Frequency range

10 MHz to 40 GHz

9 kHz to 60 GHz

Switching time

225 ns

8 ns

RF TRISE/TFALL

55 ns

3 ns

Port-to-port isolation

33 dB at 40 GHz

36 dB at 60 GHz

Insertion loss

1.8 dB at 26.5 GHz

2.7 dB at 60 GHz

P1dB Compression

31.5 dB at 26.5 GHz

33 dBm at 40 GHz

Linearity (IIP3)

50 dBm at 13.5 GHz

46 dBm at 13.4 GHz

ESD protection

2 kV HBM

1 kV HBM

Temperature range

-40 °C to +85 °C

-40 °C to +105 °C

-55 °C to +125 °C

Package

Flip-chip die; the 3 switches are pin-compatible 

Visit pSemi at IMS booth #1349 to see these pSemi 5G mmWave products on display.

About pSemi
pSemi Corporation is a Murata company driving semiconductor integration. pSemi builds on Peregrine Semiconductor's 30-year legacy of technology advancements and strong IP portfolio but with a new mission: to enhance Murata's world-class capabilities with high-performance RF, analog, mixed-signal and optical solutions. With a strong foundation in RF integration, pSemi's product portfolio now spans power management, connected sensors, optical transceivers antenna tuning and RF frontends. These intelligent and efficient semiconductors enable advanced modules for smartphones, base stations, personal computers, electric vehicles, data centers, IoT devices and healthcare. From headquarters in San Diego and offices around the world, pSemi's team explores new ways to make electronics for the connected world smaller, thinner, faster and better. To view pSemi's semiconductor advancements or to join the pSemi team, visit www.psemi.com.

The Peregrine Semiconductor name, Peregrine Semiconductor logo and UltraCMOS are registered trademarks and the pSemi name, pSemi logo, HaRP and DuNE are trademarks of pSemi Corporation in the U.S. and other countries. All other trademarks are the property of their respective companies. The pSemi website is copyrighted by pSemi Corporation. All rights reserved.

Editorial Contact:
Elizabeth Brown
Townsend Team
Phone: 619.993.4648
pr@psemi.com

 

Ideal for 5G test and measurement applications, the 50 GHz digital step attenuator (DSA) exemplifies pSemi’s high-performance capabilities at mmWave frequencies.

The pSemi PE43508 is the world’s first single-chip digital step attenuator (DSA) to support the entire 9 kHz to 50 GHz frequency range.

pSemi Corporation is a Murata company driving semiconductor integration. pSemi builds on Peregrine Semiconductor’s 30-year legacy of technology advancements and strong IP portfolio but with a new mission—to enhance Murata’s world-class capabilities with high-performance semiconductors. (PRNewsfoto/pSemi Corporation)

Cision View original content with multimedia:http://www.prnewswire.com/news-releases/psemi-showcases-5g-mmwave-portfolio-at-ims-2018-and-introduces-worlds-first-50-ghz-digital-step-attenuator-dsa-300664584.html

SOURCE pSemi Corporation


[ Back To TMCnet.com's Homepage ]







Technology Marketing Corporation

35 Nutmeg Drive Suite 340, Trumbull, Connecticut 06611 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2018 Technology Marketing Corporation. All rights reserved | Privacy Policy