SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

OneSpin Completes All Factory Inspections, Audits by Internationally-Recognized Testing Body TÜV SÜD
[February 14, 2018]

OneSpin Completes All Factory Inspections, Audits by Internationally-Recognized Testing Body TÜV SÜD


MUNICH, Germany and SAN JOSE, Calif., Feb. 14, 2018 (GLOBE NEWSWIRE) -- OneSpin® Solutions, provider of innovative formal verification solutions for highly reliable, digital integrated circuits (ICs), today announced successful completion of a series of factory inspections and audits of its organization and tool development processes by internationally-recognized testing body TÜV SÜD.

This conformance level enables OneSpin to provide certified formal verification solutions meeting tool qualification requirements set by functional safety standards (ISO 26262, IEC 61508 and EN 50128/SIL 3). As a result, OneSpin's formal tools and solutions can reach the highest safety integrity levels (ASIL D and SIL 3).

“Achieving this level of confirmation from TÜV SÜD enables us to remove the burden of tool qualification from users for an unprecedented level of productivity and safety compliance,” affirms Dr. Raik Brinkmann, OneSpin’s president and chief CEO. “We now empower engineers facing tough technical challenges and notoriously hard-to-satisfy safety standards to seamlessly deploy the latest formal technology into their safety-critical design flows.”

The TÜV SÜD audit reviewed OneSpin’s ability to meet the requirements for the tool qualification methods “evaluation of the development process” and “validation of the software tool” defined in ISO 26262. These methods can be applied to all tool confidence levels and enable tool qualification through ASIL D, the highest automotive safety integrity level. In addition, OneSpin satisfied the requirements for T2 off-line tools, the classification required for verificaton tools according to IEC 61508 and EN 50128.

With this foundation, OneSpin’s certified Tool Qualification Kits ensure that a design flow or tools follow the safety manual without imposing additional requirements. The user can apply the Tool Qualification Kit directly to the tool evaluation step required by the functional safety standards with no additional tool qualification effort. This accelerates the process and eliminates the need to implement extensive tool error-detection justification or other time-consuming tool qualification methods such as “increased confidence from use."

The first Tool Qualification Kit is available for OneSpin 360 EC-FPGA™, an automatic sequential equivalence checker that secures FPGA flows against the risk of synthesis and other implementation errors. (For more details, see accompanying news release dated February 14: “OneSpin Announces Immediate Availability of OneSpin 360 EC-FPGA Tool Qualification Kit Certified for ISO 26262, IEC 61508, EN 50128.”) Additional Tool Qualification Kits for other OneSpin tools will be announced later in the year.


To learn more about OneSpin’s Tool Qualification Kits visit onespin.com/tuv.

About OneSpin Solutions
OneSpin Solutions has emerged as a leader in formal verification through a range of advanced electronic design automation (EDA) solutions for digital integrated circuits. Headquartered in Munich, Germany, OneSpin is passionate about enabling users to address design challenges in areas where reliability really counts: safety-critical verification, SystemC/C++ high-level synthesis (HLS) code analysis and FPGA equivalence checking. OneSpin’s advanced formal verification platform and dedication to getting it right the first time have fueled dramatic growth over the past five years as the company forges partnerships with leading electronics suppliers to pursue design perfection. OneSpin: Making Electronics Reliable.

Engage with OneSpin at:
Website: www.OneSpin.com
Twitter: @OneSpinSolution
LinkedIn: https://www.linkedin.com/company/onespin-solutions
Facebook: https://www.facebook.com/OneSpinSolutions

OneSpin, OneSpin Solutions and the OneSpin logo are trademarks of OneSpin Solutions GmbH. All other trademarks are the property of their respective owners.

For more information, contact:
Nanette Collins                         
Public Relations for OneSpin Solutions      
(617) 437-1822                                                  
nanette@nvc.com

Primary Logo


[ Back To TMCnet.com's Homepage ]






Technology Marketing Corporation

35 Nutmeg Drive Suite 340, Trumbull, Connecticut 06611 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2018 Technology Marketing Corporation. All rights reserved | Privacy Policy