TMCnet News
UNH-IOL Announces First Devices to Receive the IPv6 CE Router LogoThe University of New Hampshire InterOperability Laboratory (UNH-IOL (News - Alert)), an independent provider of broad-based testing and standards conformance services for the networking industry, announced today that four customer edge (CE) routers have been approved for the IPv6 Ready CE Router Logo. Devices from Broadcom, Netgear and ZTE (News - Alert) passed the necessary IPv6 test cases, enabling them to bear a mark established by the IPv6 Ready Logo Committee (v6LC). The IPv6 Ready Logo indicates to service providers that IPv6 will work on those models, allowing end users to utilize the new addressing service. Total IPv6 traffic increased dramatically in July 2015, when the American Registry for Internet Numbers (ARIN) reported that North America had exhausted its IPv4 addresses. As consumer Internet of Things (IoT) technologies gain traction, a trend on display at CES 2016, IPv6 traffic is expected to continue rising. This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20160121005212/en/ The newly certified devices underwent IPv6 testing or an official review within the UNH-IOL Home Networking Consortium, a one-stop shop for all products requiring a full complement of home networking test services. The products that successfully met all the requirements set by the v6LC and conformed to the IETF's RFC 7084 include the Broadcom BCM97435VMS, Netgear R6300v2, Netgear WNDR3800, and ZTE ZXHN H267N. Interest among service providers for IPv6 Ready CE routers follows years of preparing their networks to handle both IPv4 and IPv6, and now embracing the limits of the former. According to Akamai's State of the Internet Q2 2015 report, the depletion of available IPv4 address space worldwide has continued as expected. By expanding the length of IP addresses from 32 bits to 128 bits, IPv6 creates a virtually limitless supply of addresses. That inventory is critical to leading service providers that today are not only delivering communications and entertainment services to a growing number of customer premise equipment (CPE) and consumer electronic devices, but also enabling new solutions that leverage even more IP-enabled endpoints within an Internet of Things framework. In addition to supporting the anticipated exponential growth of IoT devices, IPv6 enhances security and enables devices to communicate more directly, issues of vital concern to service providers as they launch or expand their offerings in the connected home market. "IPv6 is no longer the future, but the present, which makes independent testing programs such as those offered by the UNH-IOL more important than ever before," said John Brzozowski, Fellow and Chief IPv6 Architect at Comcast (News - Alert) Cable. "Operating the world's largest native broadband IPv6 deployment, we've seen the critical importance of industry standards in ensuring interoperability, and smoothing the ongoing transition from IPv4 to IPv6. The IPv6 Ready CE Router Logo not only provides critical information to consumers, but also helps to support IPv6 adoption." The growing IoT ecosystem was a leading topic at CES 2016 in Las Vegas, especially at the collocated Parks Associates (News - Alert) CONNECTIONS Summit. A market research and consulting company specializing in emerging consumer technology products and services, Parks has reported that ownership of smart home products increased by 50 percent in the past year and that 43 percent of U.S. broadband households plan to purchase a smart home device in the next 12 months. By demonstrating proper IPv6 readiness, CE router manufacturers can gain a competitive advantage against other companies aiming to support service providers in their IoT-related initiatives. Technology vendors can submit their products to IPv6 Ready CE Router Logo testing by joining the UNH-IOL Home Networking Consortium. The annual membership for the collaborative test program includes Broadband Forum (News - Alert) TR-069 and Digital Living Network Alliance (DLNA) testing. Testing for IPv6 at the UNH-IOL takes approximately three weeks, and occurs both independently and through collaborative plugfests. The Home Networking Consortium also helps members track new efforts in working groups, such as IETF Homenet and Broadband Forum Broadband User Services, to aid development and testing in future home networking protocols. Companies may also gain access and support for the UNH-IOL INTACT software for an annual fee. The IOL INTACT software is the tool used for IPv6, IPsec, Routing and Home Networking testing and is available for customers to replicate the UNH-IOL's testing in-house. About the UNH-IOL Founded in 1988, the UNH-IOL provides independent, broad-based interoperability and standards conformance testing for data, telecommunications and storage networking products and technologies. Combining extensive staff experience, standards-bodies participation and a 28,000+ square foot facility, the UNH-IOL helps companies efficiently and cost effectively deliver products to the market.
www.iol.unh.edu
| Twitter
@UNH_IOL | Facebook
@UNHIOL
View source version on businesswire.com: http://www.businesswire.com/news/home/20160121005212/en/ |
