SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

TI Unveils IO-LINK PHY with Fault Protection [Professional Services Close - Up]
[July 07, 2013]

TI Unveils IO-LINK PHY with Fault Protection [Professional Services Close - Up]

(Professional Services Close - Up Via Acquire Media NewsEdge) Texas Instruments (TI) introduced a new family of fully- integrated IO-LINK physical (PHY) layer devices, replacing discrete implementations and providing a great level of flexibility.

According to a release, the SN65HVD101 and SN65HVD102 provide higher output current and higher operating temperatures compared to the competition. This enables their use in point-to-point communication applications such as pressure, level, temperature or flow IO-LINK sensors and IO-LINK actuator drives and valves in harsh industrial applications.

TI said key features and benefits of the SN65HVD101 and SN65HVD102 are: -Integration slashes board space: The new IO-LINK PHY devices integrate a voltage regulator with the ability to supply up to 20 mA for local circuits, which reduces board area by 50 percent compared to discrete implementations and enables adaptation to existing 3.3- V or 5-V controllers.


-Survives cross-wire faults: These devices integrate up to 40-V, steady-state protection to prevent damage due to installation faults or cable breaks. Up to 50-V transient protection prevents damage from power surges on field voltages, eliminating the need for an external protection device.

-Highest operating temperature: With an operating temperature range of -40 C to +105 C, the SN65HVD101 and SN65HVD102 are IO-LINK PHY devices with capability for use in harsh industrial applications.

-Widest output current range: These ICs drive up to 480 mA for interoperability with a wide range of sensors and small actuators, while competitors drive at 300 mA or less. The output current can also be set with a single resistor to provide self-limiting for safe operation in lower-power applications.

Solutions utilizing IO-LINK require a microcontroller (MCU) in the slave device configuration of the standard. TI's ultra-low power MSP430TM MCUs are the best fit for point-to-point communication and low-power operation. With up to 512KB of flash memory and integrated analog-to-digital converters (ADCs), these MCUs are equipped to quickly process data from various types of sensors.

The SN65HVD101EVM is available to evaluate device parameters while acting as a guide for board layout.

The SN65HVD101 and SN65HVD102 are available in a 4-mm by 3.5-mm, 20-pin VQFN package.

TI provides a portfolio of analog integrated circuits (ICs) for a range of applications, including smart grid, factory automation, high-voltage power, LED lighting and control.

Texas Instruments Inc. (TI) is a semiconductor design and manufacturing company that develops analog ICs and embedded processors.

More information: ti.com/interfaceforum-pr www.ti.com/sn65hvd101-pr www.ti.com/analogwire-pr www.ti.com/newscenterphotos-pr www.ti.com/industrial-pr www.ti.com ((Comments on this story may be sent to newsdesk@closeupmedia.com)) (c) 2013 ProQuest Information and Learning Company; All Rights Reserved.

[ Back To TMCnet.com's Homepage ]





LATEST VIDEOS

DOWNLOAD CENTER

UPCOMING WEBINARS

MOST POPULAR STORIES





Technology Marketing Corporation

800 Connecticut Ave, 1st Floor East, Norwalk, CT 06854 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2014 Technology Marketing Corporation. All rights reserved.