Nine Solar Innovations Offer Hope to Struggling PV Supply Chain, According to New GTM Research Report
(GlobeNewswire Via Acquire Media NewsEdge) BOSTON, Nov. 20, 2012 (GLOBE NEWSWIRE) -- The global photovoltaic (PV) manufacturing sector continues to be besieged by problems of overcapacity and mounting financial losses. However, a new report from GTM Research indicates that equipment vendors, material suppliers, component manufacturers and start-ups are pushing the needle on advanced technology concepts like never before, in a bid to further increase efficiencies and lower the cost curve of crystalline silicon (c-Si) PV technology.
Titled Innovations in Crystalline Silicon PV 2013: Markets, Strategies and Leaders in Nine Technology Areas, this 262-page report closely examines the benefits, challenges, key vendors and market penetration prospects of nine advanced technology platforms that are being commercialized in the 2012 to 2014 timeframe.
The nine technologies covered in the report are:
1. Quasi-Mono Wafers
2. Diamond Wire Sawing
3. Kerfless Wafers
4. Selective Emitters
5. Reduced-silver Metallization
6. Dielectric-Passivated Backside Cell Architectures
7. Conductive Adhesives
8. Encapsulant Alternatives to EVA
9. Frameless and Plastic-Framed Module Designs
"Silicon PV is entering an era of unprecedented technological progress", said Andrew Gabor, Consulting Analyst at GTM Research and author of the report. "While most c-Si cost reductions until now have stemmed from economies of scale and reductions in the cost of key consumables, the next few years will have to see technology innovation playing a dominant role in driving down costs. Platforms such as diamond wire sawing, selective emitters and reduced-silver metallization will enable higher cell and module efficiencies, more efficient material utilization and higher throughput processes that will keep the cost of silicon PV declining for years to come."FIGURE: Key Questions Addressed in the Report (http://www.greentechmedia.com/content/images/reports/questions-addressed.png)
"The rate of technological innovation for c-Si is overwhelming and the potential impacts on PV module cost, performance and reliability are difficult to understand or predict," continued Gabor. "This report aims to help readers navigate these topics. We have made concrete recommendations based on both technology and cost/performance merits and do not shy away from controversial conclusions."
GTM Research analyzes more than 150 vendors in this report and identifies the following companies and their technologies as potential market leaders:
Applied Materials (NASDAQ:AMAT): Ion implantation diffusion for mono c-Si
Dai Nippon Printing (Tokyo:7912): Polyolefin encapsulant
DuPont (NYSE:DD): Ionomer encapsulant
Hitachi Chemicals (Tokyo:4217): Conductive adhesives for cell interconnection
Komatsu (OTC:KMTUY): Diamond wire sawing
Meyer Burger (SIX:MBTN): Diamond wire sawing
Schmid Group: Mask/etchback selective emitter for multi c-Si and TinPad™ rear metallization
For more information on the companies active in each of the nine technologies areas, visit the report's web page at http://www.greentechmedia.com/research/report/innovations-in-crystalline-silicon-pv-2013About GTM Research
GTM Research, a division of Greentech Media, provides critical and timely market analysis in the form of research reports, data services, advisory services and strategic consulting. GTM Research's analysis also underpins Greentech Media's webinars and live events. Our coverage spans the green energy industry including solar power, smart grid, energy storage, energy efficiency and wind power sectors.
The Greentech Media logo is available at http://www.globenewswire.com/newsroom/prs/ pkgid=12178
CONTACT: Nicholas Rinaldi
Research Marketing Manager
+1 347 725 3510
Source: Greentech Media
2012 GlobeNewswire, Inc.
[ Back To TMCnet.com's Homepage ]