TMCnet News

Japan : Toshiba Develops Extremely Low-Power 2.4 GHz VCO Utilizing Dynamic Supply Voltage Control Technique [TendersInfo (India)]
[September 29, 2014]

Japan : Toshiba Develops Extremely Low-Power 2.4 GHz VCO Utilizing Dynamic Supply Voltage Control Technique [TendersInfo (India)]


(TendersInfo (India) Via Acquire Media NewsEdge) Toshiba Corporation today announced that it has developed an extremely low-power 2.4 GHz Voltage Controlled Oscillator (VCO) for low-power wireless systems, such as Bluetooth Low Energy (BLE). Low-voltage operation below the threshold voltage of the transistor is achieved by combining the features of a class-D VCO and dynamic control technique of the supply voltage. The power consumption of the VCO be reduced to one-fifth to one-tenth compared to the conventional one. Toshiba presented the VCO in European Solid-State Circuits Conference (ESSCIRC) in Venice, Italy, on September 24th 2014.



Recently, applications of wireless communication have widened to include sport, fitness, healthcare, watches and more. As these applications often assume long-life operation with low-capacity batteries, such as a coin cell battery and energy harvester, extremely low-power wireless IC is required. This has spurred research into low-power wireless ICs and individual building blocks.

Among building blocks, reducing VCO power consumption is particularly challenging, as superior noise performance depends on high power consumption. Many techniques for low-noise and low-power consumption of VCO have been researched, mainly focused on reducing current consumption. However, for extremely low-power, reduction in the voltage domain is necessary.


Toshiba has applied class-D VCO developed with advanced CMOS technology, which use transistors as switches (not as transconductors, like conventional VCOs). Although the class-D VCO can achieve superior noise performance at low supply voltage, the supply voltage also has to be as low as possible for extremely low-power.

An extremely low-power VCO has been developed with a dynamic supply voltage control technique that uses a Low-Drop Out (LDO) circuit as the dynamic supply voltage controller. At start-up of the VCO, the supply voltage is boosted to ensure fast, reliable start-up. In the steady-state after start-up, the supply voltage is controlled below the threshold voltage, which keeps the oscillation even in the supply voltage below the threshold voltage of the transistor, as a characteristic of the class-D VCO is an oscillation amplitude about three times higher than the supply voltage. The extremely low-voltage operation results in the low-power consumption by the VCO.

The test chip is fabricated in 28nm CMOS technology with high threshold voltage. While high threshold voltage can reduce leakage current in sleep-mode, it increases power consumption in conventional class-D VCOs, because higher supply voltage is required. However, since the proposed VCO can oscillate at lower voltage than the threshold voltage, low-power oscillation can be available even with high threshold voltage. Extremely low-power consumption of only 171µW is achieved, along with phase noise performance required for low-power wireless systems.

(c) 2014 Euclid Infotech Pvt. Ltd. Provided by SyndiGate Media Inc. (Syndigate.info).

[ Back To TMCnet.com's Homepage ]