SUBSCRIBE TO TMCnet
TMCnet - World's Largest Communications and Technology Community

TMC NEWS

TMCNET eNEWSLETTER SIGNUP

Dual Channel PC/104 CAN Module Provides 1000V Isolation for Automotive and Industrial Applications from WinSystems, Inc.
[February 12, 2013]

Dual Channel PC/104 CAN Module Provides 1000V Isolation for Automotive and Industrial Applications from WinSystems, Inc.

Arlington, Texas, Feb 12, 2013 (PRWeb.com via COMTEX) -- WinSystems introduces their PCM-CAN-2-ISO, a PC/104-compliant, dual channel, isolated Controller Area Network (CAN) module with Windows and Linux drivers available. The board employs high-speed isolated data couplers and power supplies to provide 1000V protection between the two NXP SJA1000 CAN controllers and the network interface. This makes the module ideal for operation in high-voltage renewable energy, high-speed industrial control, or unpredictable automotive applications, while it maintains low EMI and low-latency operation. Each CAN channel can provide isolated +5VDC power or receive isolated +5 to +12VDC power from the interface for additional flexibility. The +5VDC power supply includes overvoltage, overcurrent, and short-circuit protection.

The PCM-CAN-2-ISO is compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID). CAN is an industry-standard, serial, asynchronous, multi-master communication protocol for connecting electronic control modules, sensors, and actuators in automotive and industrial applications. The PCM-CAN-2-ISO supports transfer rates to 1 Megabits per second and has jumper selectable termination resistors so it can be used in various topology systems.

WinSystems offers this board in other off-the-shelf configurations. The PCM-CAN-2 is a dual channel, non-isolated unit. The PCM-CAN-1 is a single channel, non-isolated unit. The PCM-CAN-1-ISO is a single channel, isolated unit. Special OEM configurations are possible. All configurations will operate over the industrial temperature range of -40° to +85° Celsius.


AVAILABILITY AND PRICING Delivery is from stock. Please contact WinSystems' Applications Engineering Group for pricing; telephone: (817) 274-7553, Fax: (817) 548-1358, and e-mail: Info@WinSystems.com.

PRODUCT PAGES PCM-CAN-2-ISO and PCM-CAN-1-ISO: Product Pagehttp://pc104.winsystems.com/products/PCM-CAN-2-ISO.cfm Data sheethttp://www.winsystems.com/datasheets/PCM-CAN-2-ISO-DS.pdf PCM-CAN-2 and PCM-CAN-1: Product Pagehttp://pc104.winsystems.com/products/PCM-CAN-2.cfm Data sheethttp://www.winsystems.com/datasheets/PCM-CAN-2-DS.pdf ABOUT WINSYSTEMS WinSystems designs and manufactures industry-standard PC/104, PC/104-Plus, EPIC, EBX, SUMIT-ISM, and STD Bus single board computers (SBCs), I/O modules, Panel PCs, and enclosures for use by OEMs and system integrators worldwide. We have served the industrial, transportation, pipeline, Mil/COTS, communications, remote, and medical markets for over 30 years. We are an employee-owned company.

WinSystems, Inc.

715 Stadium Drive | Arlington, Texas 76011 USA Websitehttp://www.WinSystems.com E-mailInfo(at)WinSystems(dot)com Telephone (817) 274-7553 Read the full story at http://www.prweb.com/releases/WinSystemsDualChannel/PC104CAN_Module/prweb10418317.htm PRWeb.com

[ Back To TMCnet.com's Homepage ]





LATEST VIDEOS

DOWNLOAD CENTER

UPCOMING WEBINARS

MOST POPULAR STORIES





Technology Marketing Corporation

800 Connecticut Ave, 1st Floor East, Norwalk, CT 06854 USA
Ph: 800-243-6002, 203-852-6800
Fx: 203-866-3326

General comments: tmc@tmcnet.com.
Comments about this site: webmaster@tmcnet.com.

STAY CURRENT YOUR WAY

© 2014 Technology Marketing Corporation. All rights reserved | Privacy Policy