[July 25, 2016] |
|
Resonant to Report Second Quarter 2016 Financial Results and Host a Conference Call on Wednesday, August 10th at 1:30 p.m. Pacific time
Resonant Inc. (NASDAQ: RESN), a designer of filters for radio frequency,
or RF, front-ends that specializes in delivering designs for difficult
bands and complex requirements, today announced it will release
financial results for the second quarter ended June 30, 2016, after
market close on Wednesday, August 10, 2016. Management will host an
investor conference call at 1:30 p.m. PDT/4:30 p.m. EDT.
Investors interested in participating in the live call can dial
1-877-407-3982 from the U.S. or 1-201-493-6780 from international
locations. A webcast will also be available on the IR section of the
Resonant website or by clicking here: RESN
2Q16 Webcast. The webcast will be available for 30 days. A telephone
replay will also be available approximately three hours after the call
concludes and will run through September 10, 2016 by dialing
1-877-870-5176 fom the U.S., or 1-858-384-5517 from international
locations, and entering Replay Pin Number: 13639914.
About Resonant® Inc.
Resonant is creating innovative filter designs for the RF front-end, or
RFFE, for the mobile device industry. The RFFE is the circuitry in a
mobile device responsible for the radio frequency signal processing and
is located between the device's antenna and its digital baseband.
Filters are a critical component of the RFFE that selects the desired
radio frequency signals and rejects unwanted signals and noise.
About Resonant's ISN® Technology
Resonant can create designs for hard bands and complex requirements that
we believe have the potential to be manufactured for half the cost and
developed in half the time of traditional approaches. The Company's
large suite of proprietary mathematical methods, software design tools
and network synthesis techniques enable it to explore a much bigger set
of possible solutions and quickly derive the better ones. These improved
filters still use existing manufacturing methods (i.e. SAW) and can
perform as well as those using higher cost methods (i.e. BAW). While
most of the industry designs surface acoustic wave filters using a
coupling-of-modes model, Resonant uses circuit models and physical
models. Circuit models are computationally much faster, and physical
models are highly accurate models based entirely on fundamental material
properties and dimensions. Resonant's method delivers excellent
predictability, enabling achievement of the desired product performance
in roughly half as many turns through the fab. In addition, because
Resonant's models are fundamental, integration with its foundry and fab
customers is eased because its models speak the "fab language" of basic
material properties and dimensions.
View source version on businesswire.com: http://www.businesswire.com/news/home/20160725005197/en/
[ Back To Mobile World Congress's Homepage ]
|